Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roseway]

That's great, thank you!

[shdf]

@roseway
could you update the first page with a link to this new method to unlock the device ?

[roseway]

Done

[shdf]

  Thank you

[Lil-Koby]

The new unlock tool looks very promising !! Thanks a bunch !
Now a custom gui would be nice... with a button to activate bridge modem.
Or is it allready built into the official firmware ?
My 4132 should arrive the next 3-4 days...

[shdf]

the custom GUI for the DGA4130 works in the DGA4132, so there is a Bridge mode available 

[Lil-Koby]

Great !

Did you tried fw 1.1.0_001_closed by any chance ?
Im still interested to try the new dsl driver but i read before that upgrading to 1.1.0_001 is kinda risky...
But it shouldn't be too risky anymore right, because of the easy downgrade solution ?

[shdf]

i don't remember now but when i tried it nothing worked, i had to go back to 1.0.3 with tftpd, i don't even know what the gui looks like and what was new in this firmware...

[gazaai]

What's the difference between the DGA4130 and DGA4132?

I've just purchased a DGA4130 and wonder if that's now been a mistake

[shdf]

the DGA4130 :
4 LAN + 1 WAN

the DGA4132 :
3 LAN + 1 WAN/LAN + 1 SFP port

[Lil-Koby]

i don't even know what the gui looks like and what was new in this firmware...

Well at least the xdsl driver is new... 
Have you checked the local pingtimes with CPU auto (256), are they the same as with the DGA4130 ?

I've just purchased a DGA4130 and wonder if that's now been a mistake

Definitely not a mistake, the DGA4130 is a great device and i dont think that you will make much use of the SFP port...

[gazaai]

Ok thanks for the letting me know what is different shdf and Lil-Koby.

And I wont make use of the SFP port so wont make a difference to me.

[shdf]

@Lil-Koby
it was not working at all, no gui access, i think it was going in bootloop...so i had to go back with tftp

[j0hn]

Received my DGA4130 a couple weeks ago but only just getting the time to play with it.

Got it running 1.0.3 and GUI 4.5.10

Question.... How on Earth do I set this up for Bride mode in the UK?
I can't find any screen where i turn the VLAN off.

[shdf]

if you don't see it in the gui then you can always remove the vlan from the wan interface in /etc/config/network ?
that hacked GUI unfortunatefly have many bugs, i can't count how many people are complaining about the bridge, why not use it in routed mode ?

For bridge mode, refer to my post here :
http://forum.kitz.co.uk/index.php/topic,20343.msg360921.html#msg360921