Did a upgrade to 1.0.3, still using GUI 3.25 and tested the Asus 1.10.03 and archer vr2800 v1(B2pvbH042s) xdsl driver.
But for me there is no difference in syncrate and still Interleaving depth 8/4.
Does anyone have the new A2pvfbH043k.d26m (1.1.0_001) driver with 1.0.3/1.0.4 running?
Do i need to delete /overlay/bank2 before upgrading to fw 1.0.4 or better stay at 1.0.3 when only need bridge mode running ?
I just want to disable as many things as possible and I would like to use/test the latest xdsl driver...
root@VDSL_bridge:~# cat /proc/banktable/active
bank_1
I have also downloaded my current config and noticed a few things...
[mobiled]
mobiled.device_defaults=device_defaults
mobiled.device_defaults.radio_pref='lte'
mobiled.device_defaults.enabled='0'
mobiled.platform=platform
mobiled.platform.power_on='1'
Could this be related to log message
[mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check ?
I dont need the mobile part and disabled it in router mode before switched to bridge mode but the log message is still there...
[power]
power.ethernet=ethernet
power.ethernet.ethapd='1'
power.ethernet.autogreeen='1'
power.ethernet.eee='1'
power.cpu=cpu
power.cpu.cpuspeed='256'
power.cpu.wait='1'
Could these settings be related to the latency/ping problem ?
[ledfw]
ledfw.internet=service
ledfw.internet.check='1'
ledfw.iptv=service
ledfw.iptv.check='0'
ledfw.iptv.itf='iptv'
ledfw.voip=service
ledfw.voip.check='1'
ledfw.timeout=timeout
ledfw.timeout.ms='0'
Could this be related to the red LED problem in bridge mode ?
[mcastsnooping]
mcastsnooping.lan=interface
mcastsnooping.lan.mld_snooping='0'
mcastsnooping.lan.mcast_flooding='1'
mcastsnooping.lan.igmp_snooping='1'
Do i need igmp_snooping and mcast_flooding enabled in bridge mode ?
[igmpproxy]
igmpproxy.globals.state='1'
Igmp proxy should be completely disabled in bridge mode... I allready used /etc/init.d/igmpproxy stop + /etc/init.d/igmpproxy disable
[minidlna]
minidlna.config.enabled='1'
minidlna.config.inotify='1'
Does this mean minidlna is enabled ? I really don't need it in bridge mode...
Sorry for so many questions at once...
Best regards !!