Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 3 4 [5] 6 7 ... 13

Author Topic: FTTC Modem Question  (Read 40079 times)

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #60 on: April 17, 2016, 08:13:47 AM »

Got this back from Plusnet, does anything in here indicate G.INP being active or not?

KBD
BRAS   adsl35000   Profile Info   N/A
NF507 - No issues have been identified in the BTW network. KBD tests indicate no BTW network fault. Please perform all CP and End User checks.
PTTR
Type   Date   Direction   Profile   Speed
TAP-1   11-4-2016 (8:52)   DownStream   76735   63320
TAP-1   11-4-2016 (8:53)   UpStream   20000   9710
GEA Service Test
Test Outcome   Pass
Test Outcome Code   GTC_FTTC_SERVICE_0001
Description   GEA service test completed and no fault found but unable to check for customer equipment connected to modem.
Main Fault Location   OK
Appointment Required   N
NTE Power Status   PowerOn
Sync Status   In Sync
Downstream Speed   79.3
Upstream Speed   20.0
Profile Name   0.128M-80M Downstream, Error Protection Off - 0.128M-20M Upstream, Error Protection Off
Copper Line Test   Pass
Bridge Tap   Not Detected
Radio Frequency Ingress   Not Detected
REIN   Not Detected
Cross Talk   Not Detected

WP Profile
76800

Thanks guys!

Josh

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #61 on: April 17, 2016, 08:19:44 AM »

Profile Name   0.128M-80M Downstream, Error Protection Off - 0.128M-20M Upstream, Error Protection Off

Does this mean no interleaving is on the line?

And with me still getting higher pings 20ms+ to the bbc, does this indicate G.INP being active and the modem not being compatible?

Thank you!

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: FTTC Modem Question
« Reply #62 on: April 17, 2016, 09:13:40 AM »

That looks like an open profile with no error correction, so no INP, no Interleaving and no G.INP. You're on fastpath.
Logged

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #63 on: April 17, 2016, 09:38:17 AM »

That looks like an open profile with no error correction, so no INP, no Interleaving and no G.INP. You're on fastpath.

But if I'm on fastpath why are my pings coming in higher that was they was before first installation?

10ms has been added and speeds look to have slightly dropped.

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #64 on: April 17, 2016, 09:53:56 AM »

Dray, not saying your wrong, it does show that by my profile, just can't understand why ping requests are higher than unsual when nothing has changed on my end.
« Last Edit: April 17, 2016, 10:52:25 AM by JoshShep »
Logged

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: FTTC Modem Question
« Reply #65 on: April 17, 2016, 10:22:55 AM »

No, I know. Looks like the GEA report that Plusnet have given you is wrong  :o
Logged

d2d4j

  • Kitizen
  • ****
  • Posts: 1103
Re: FTTC Modem Question
« Reply #66 on: April 17, 2016, 11:51:08 AM »

Hi

Please could I ask if this is a commercial or residential contract

If commercial contract, I think those ping times are normal

As a quick test, you could set your user credentials to green light as dray posted some time ago I believe from memory

Just a thought and sorry if I'm wrong

Many thanks

John
Logged

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #67 on: April 17, 2016, 12:47:13 PM »

Hi

Please could I ask if this is a commercial or residential contract

If commercial contract, I think those ping times are normal

As a quick test, you could set your user credentials to green light as dray posted some time ago I believe from memory

Just a thought and sorry if I'm wrong

Many thanks

John

Not sure what you mean by green light. What does he mean Dray?

Cheers,
Josh

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: FTTC Modem Question
« Reply #68 on: April 17, 2016, 01:41:53 PM »

I think he means changing the username the modem uses to access a test domain.
Logged

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #69 on: April 21, 2016, 10:43:53 PM »

Finally received the HG612 today and I now have it unlocked.

# xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status:   0
Max:    Upstream rate = 31827 Kbps, Downstream rate = 92980 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 79442 Kbps

Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile 17a
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        6.4             12.9
Attn(dB):        13.4            0.0
Pwr(dBm):        13.8            1.1
                        VDSL2 framing
                        Bearer 0
MSGc:           14              150
B:              51              236
M:              1               1
T:              64              5
R:              12              16
S:              0.0208          0.3771
L:              24576           5410
D:              1555            1
I:              64              255
N:              64              255
                        Counters
                        Bearer 0
OHF:            2711900         592552
OHFErr:         0               0
RS:             694056816               4137148
RSCorr:         2270            0
RSUnCorr:       0               0

                        Bearer 0
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    554469225               0
Data Cells:     8012858         0
Drop Cells:     0
Bit Errors:     0               0

ES:             0               0
SES:            0               0
UAS:            28              28
AS:             3630

                        Bearer 0
INP:            3.00            0.00
INPRein:        0.00            0.00
delay:          8               0
PER:            1.33            6.15
OR:             119.53          202.87
AgR:            79561.21        20203.27

Bitswap:        1132/1132               1/1

Total time = 1 hours 58 sec
FEC:            2270            0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            28              28
LOS:            0               0
LOF:            0               0
LOM:            0               0
Latest 15 minutes time = 58 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 15 minutes time = 15 min 0 sec
FEC:            416             0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Latest 1 day time = 1 hours 58 sec
FEC:            2270            0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            28              28
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 1 day time = 0 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Since Link time = 1 hours 29 sec
FEC:            2270            0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
#
ATP>

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #70 on: April 21, 2016, 10:44:52 PM »

interleaving is quite aggressive here

D:              1555            1

Would have indicate the slightly lower sync?

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #71 on: April 21, 2016, 10:50:35 PM »

Is there a way to check if G.INP is enabled? Like a command I can run?

Also because the compatible modem has only just been connected is it possible the line has to adjust the connection and then it's turned on?

Cheers

Josh

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: FTTC Modem Question
« Reply #72 on: April 21, 2016, 11:05:25 PM »

When G.INP is enabled, you will see Bearer 1 in those stats.

And yes, that's what usually happens.
Logged

JoshShep

  • Reg Member
  • ***
  • Posts: 266
Re: FTTC Modem Question
« Reply #73 on: April 21, 2016, 11:17:12 PM »

When G.INP is enabled, you will see Bearer 1 in those stats.

And yes, that's what usually happens.

Cheers Dray, just looked it up it's usually 48 hours is that right?

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: FTTC Modem Question
« Reply #74 on: April 21, 2016, 11:26:08 PM »

It used to be longer but I think you're right now
Logged
Pages: 1 ... 3 4 [5] 6 7 ... 13
 

anything