Hi Guys,
Thanks again for helping me to get online.
I have been trying to operate the HG612 in bridge mode on my SKY ADSL connection so the R7800 handles the DHCP & NAT duties.
I currently have online access through the HS612 connected in Route Mode, having entered my SKY username and password in the WAN settings.. DHCP is enabled on the HG612 and the R7800 obtains an IP address from the HG612. The HG612 is on 192.168.1.1 IP address range and the R7800 is on 192.168.0.1 IP address range. This obviously creates the double NAT issues.
I have followed biohead’s instructions in
http://forum.kitz.co.uk/index.php?topic=12833.0, however it has not worked. I have input my SKY username and password within the R7800 in the 'Internet Setup' page attached, however it does not connect to the HG612.
I know my ADSL connection uses PPPoA, therefore the HG612 needs to translate the PPPoE details from the R7800 to PPPoA in order to authenticate and talk to the ISP.
Has anyone got what i am trying to do working with a Netgear Nighthawk range of routers? Reading online shows the setup has been achieved with the ASUS range of routers.
As always any help is much appreciated.