Here are my settings for
o2 broadband ADSL2+ (LLU) on the
Huawei Echolife HG612 / BT Openreach modem, they should work fine for
BE* too. They may not be perfect, but they should do the job
. Note.. You can probably enable Both LAN1 & LAN2 on the WAN page, I personally don't need both ports. Also, note if you are manually setting your IPv4 settings on each PC you will have to put in some working real world DNS IP's as you can't get away with pointing it at the routers IP
.
Thx to the suggestions guys, it might not have directly given me the answer, but it kept my brain ticking until I figured it out
.