Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Terranova667]

I had a reset last night about 1am, IP profile has risen back up to 46Mb and latency has dropped back down to it's normal 13-15ms It could well be that G.INP has been turned off on my line as Bob on the plusnet forum said was happening Or openreach already has a fix i dunno,  I can't confirm if G.INP is off until tomorrow when the Plusnet staff are around to check. 

[davebtx]

hi Today my broadband resynced and I lost my upload stats on up snr and the down load power increased from 7.1 to 11.3 any ideas I also lost some sync speed. and my ping gone up from 21 to 28 ms
help needed please.
 
Training Status:   Showtime
      Down      Up
SNR (dB):    5.1       0.0
Attn(dB):    28.0       0.0
Pwr(dBm):    11.3       7.2
         VDSL2 framing
         Bearer 0

xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   1
Last initialization procedure status:   0
Max:   Upstream rate = 6342 Kbps, Downstream rate = 28976 Kbps
Bearer:   0, Upstream rate = 6342 Kbps, Downstream rate = 23399 Kbps

Link Power State:   L0
Mode:         VDSL2 Annex B
VDSL2 Profile:      Profile 17a
TPS-TC:         PTM Mode(0x0)
Trellis:      U:ON /D:ON
Line Status:      No Defect
Training Status:   Showtime
      Down      Up
SNR (dB):    5.2       0.0
Attn(dB):    28.0       0.0
Pwr(dBm):    11.3       7.2
         VDSL2 framing
         Bearer 0
MSGc:      22      33
B:      47      198
M:      1      1
T:      64      5
R:      16      16
S:      0.0652      0.9971
L:      7848      1725
D:      993      1
I:      64      215
N:      64      215
         Counters
         Bearer 0
OHF:      7879725      1003261
OHFErr:      5698      0
RS:      2017149751      3631363
RSCorr:      13283556      0
RSUnCorr:   810441      0

[digitalis]

My mum's line dropped 13 hours ago and no longer has G.INP :-/

[daveesh1]

4 Days since my DLM reset and pair swap and still no G.inp and getting 1500-2000 ES errors per day without it...

[skyeci]

4 Days since my DLM reset and pair swap and still no G.inp and getting 1500-2000 ES errors per day without it...

Join the club. No g.inp since 8th april 

[skyeci]

Looks like 5 users now that had g.inp are showing as g.inp disabled. Creeping up slowly...

Edit. Make that 7 now..

[jeffers]

G.INP also taken off my line this morning. Any ideas whats happening? Have BT found issues with the G.INP on ECI cabs or something?

[skyeci]

As I have said I lost mine on the 8th april. It would appear the removal is gathering a bit of pace now after a lull. There do seem to be some issues so lets hope they sort it eventually.

[Chrysalis]

There is two things going on.

The first is removal of g.inp on lines identified to be at risk of the problems. Unknown when these lines will get re enabled.

The second is some lines were never activated for testing purposes (my line is in this group) and in a few weeks these lines will get enabled.

[davebtx]

mine never got it and has some major issue with syn speed and high laticey wish they enable my cab.

[toulouse]

I also never got G.inp enabled on my cabinet. I hope it's going to get sorted soon.

[Codescribe]

I believe I still have G.INP on my line, I have a Sky Q hub so have no stats but on 30th March my latency went from 20ms to 12ms having been on 20ms for the whole 3 years I have had FTTC.

Also my line has been banded for 14 months and my sync changed from 59993 to 60000.

[skyeci]

Another one has just lost it by the looks of it as total now at 8 being disabled. Was 7 earlier this morning...

[JoshShep]

There is two things going on.

The first is removal of g.inp on lines identified to be at risk of the problems. Unknown when these lines will get re enabled.

The second is some lines were never activated for testing purposes (my line is in this group) and in a few weeks these lines will get enabled.

You say people that haven't had G.INP enabled yet will get it in a couple of weeks. Can I ask where you got this information please?

[NewtronStar]

Can I ask where you got this information please?

Me to as this could be valuable information for users on the Kitz Forum