Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2] 3 4

Author Topic: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B  (Read 46093 times)

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2721
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #15 on: January 20, 2013, 04:25:44 PM »

Looks promising!

http://beusergroup.co.uk/pastebin/?q=50fbf5fd2b635


From that output we can see only 512 entries (nNumData=512), but when multiplied by the nGroupSize=8, that makes the 4096 tones we would expect.

I must admit, the output doesn't have a great deal of meaning for me at the moment, other than it is decimal values.
AFAIK, the HG612 reports logarithmic values (for each & every DS tone when on a Huawei DSLAM & occasionally also US too, but only when connected to an ECI cabinet).

   2788      -160.0000
   2789      -160.0000
   2790      -160.0000
   2791      -160.0000
   2792      -139.7500
   2793      -140.5000
   2794      -139.8750
   2795      -140.7500
   2796      -140.8750
   2797      -141.0000
   2798      -140.3125
   2799      -140.5000
   2800      -135.8750
   2801      -141.3125
   2802      -141.3125
   2803      -141.1875
   2804      -140.9375
   2805      -140.9375
   2806      -141.4375


Logged

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #16 on: January 23, 2013, 02:13:58 PM »

ok guys I have one of these unlocked but I see the tool is missing error stats, also that you guys have higher transmit power than me (time to ask why openreach cut my signal power?)

is there a telnet command to view the error stats?

also whats the easiest way to make 192.168.168.168 accessible without changing my pc ip, as its a very unfriendly ip.

also the tool says incorrect login credentials but they work on telnet.
« Last Edit: January 23, 2013, 03:32:58 PM by Chrysalis »
Logged

ehsan123

  • Just arrived
  • *
  • Posts: 9
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #17 on: January 29, 2013, 10:56:42 PM »

Try the other edmt software and apprently I was told that no telnet commands exist for us to see the stats (yet) unlike on then hg612   this sucks as I also wanted to view full line stats including error rate etc . Well people are working on this so I remain hopeful  :'( :baby:
Logged

Theagg

  • Just arrived
  • *
  • Posts: 2
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #18 on: February 01, 2013, 03:41:55 PM »

Hi

Ok, so I have the unlcoked ECI modem, (plus Sky Hub), I have downloaded both versions of eDMT and I'm running Windows 7.

Neither versions of eDMT work as is (both give a Timeout connection error message), so obviously I assume, as the newbie I am, there is something else that needs to be done first to allow eDMT to gain access

Instructions said I need to force a 192.168.168.X IP address on my PC's network adapter, so do I correctly assume that means going to the Network adapter properties and changing the button from "Obtain IP address automatically" to "use the following IP address" and enter the above values ? No mention of what to put for subnet and default gateway if thats the case ?

This, of course, is with the Sky Hub disconnected and the ECI modem plugged directly into my PC LAN socket.

The other option suggested is to set up NAT rules on a router which will allow traffic to reach the ECI modem (so you could still remain connected to the internet) but if I'm correct, you can't do this with the Sky Hub router ?
Logged

drsox

  • Member
  • **
  • Posts: 55
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #19 on: February 01, 2013, 03:45:37 PM »

Connecting directly using a computer set the network adapter to use the following IP address. You can use, say, 192.168.168.33 and subnet mask 255.25.255.0
The other information doesn't need to be filled in.

Remember to set it back to automatic when you reconnect to your normal LAN.

You won't be able to setup the NAT stuff without a clever router that runs DDWRT, busybox or Tomato. The base Sky router won't do it :(
Logged

ehsan123

  • Just arrived
  • *
  • Posts: 9
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #20 on: February 02, 2013, 01:19:47 PM »

Hi so yeah the edmt software worked for a while but now it says missing or unexpected data and isnt displaying the stats anymore (50/50 if it will display or not ) oh wrll i did manage to get all the details on paper  :o
Logged

ben1066

  • Member
  • **
  • Posts: 74
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #21 on: March 08, 2013, 05:21:15 PM »

Nice to see people using this, I'm not sure why you'd get unexpected data, the parsing may be wrong, but it works fine on my non /r model. With regards to the DNS lookup, I again don't know why that doesn't work for some, but if the new method works, I see no issue with it. A lot of the code could probably be done better as I was just working on what I got back from the modem, and the error handling isn't very...elegant, if you're getting errors some but not all of the time, if you could get the pipe output when it fails, I may be able to have a look at it.
Logged

mikehiow

  • Member
  • **
  • Posts: 71
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #22 on: April 08, 2013, 08:50:32 PM »

I've got the ECI /r modem.

I can telnet in, but eDMT is giving me "Unexpected or missing data"?
Logged

asbokid

  • Kitizen
  • ****
  • Posts: 1286
    • Hacking the 2Wire
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #23 on: April 08, 2013, 09:05:36 PM »

I've got the ECI /r modem.

I can telnet in, but eDMT is giving me "Unexpected or missing data"?

IIRC, drsox patched a version of eDMT, an application originally written for the ECI /I by ben1066. The source code hasn't been released publicly though.  Any chance of that patched code so that others can progress it?

cheers, a

Logged

mikehiow

  • Member
  • **
  • Posts: 71
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #24 on: April 08, 2013, 10:10:59 PM »

I was using the modified version.

Turns out I had locked up the pipe by trying (unsuccessfully) to read the settings via telnet.

A reboot fixed it.
Logged

asbokid

  • Kitizen
  • ****
  • Posts: 1286
    • Hacking the 2Wire
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #25 on: April 08, 2013, 10:25:26 PM »

Glad you got it sorted, mikehiow  :)

Are you able to use the cabling arrangement that biohead documented for the earlier ECI /I model?

i.e. continue to use the internet while obtaining statistics, all from LAN1?

cheers, a
Logged

drsox

  • Member
  • **
  • Posts: 55
Logged

mikehiow

  • Member
  • **
  • Posts: 71
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #27 on: April 08, 2013, 11:31:23 PM »

Glad you got it sorted, mikehiow  :)

Are you able to use the cabling arrangement that biohead documented for the earlier ECI /I model?

i.e. continue to use the internet while obtaining statistics, all from LAN1?

cheers, a

I am using the internet whilst getting statistics.

I haven't used any fancy cabling arrangements though - neither do I fancy plugging my LAN into a potentially open network ;)

I simply gave my WAN interface an IP of 192.168.168.1 and routed 192.168.168.0/24 via that. Works a treat.

For anyone using the Asus RT-N66U (or pretty much any linux based router with iptables - although you may have to change the interface), I did the following;
Code: [Select]
ifconfig eth0 192.168.168.1 netmask 255.255.255.0
iptables -I POSTROUTING -t nat -o eth0 -d 192.168.168.0/24 -j MASQUERADE

Seeing as the WAN connection is PPPoE (and thus Layer 2), I don't see why the cabling method shouldn't work, as well.
« Last Edit: April 08, 2013, 11:34:24 PM by mikehiow »
Logged

asbokid

  • Kitizen
  • ****
  • Posts: 1286
    • Hacking the 2Wire
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #28 on: April 09, 2013, 12:48:02 AM »

Source: https://code.google.com/p/edmtmod/downloads/list

Thanks Tom, that's excellent.  :D Hopefully others will now join the project to get the ECI reporting a similar suite of data for which the Broadcoms are famous!

cheers, a
Logged

asbokid

  • Kitizen
  • ****
  • Posts: 1286
    • Hacking the 2Wire
Re: Fixed eDMT and eDMT for ECI Modem B-FOCus V-2FUb/r Rev B
« Reply #29 on: April 09, 2013, 12:52:40 AM »

I am using the internet whilst getting statistics.

I haven't used any fancy cabling arrangements though - neither do I fancy plugging my LAN into a potentially open network ;)

I simply gave my WAN interface an IP of 192.168.168.1 and routed 192.168.168.0/24 via that. Works a treat.

That's great news, even if does require a posh router.  So the loss of LAN2 isn't exactly catastrophic. Have you found telnetd is hanging up?  I've left it running for days without any problems, but then it's in a semi-dormant state - synced up but with no layer 3 traffic (across the bridge).

A new kernel and root file system using the OpenWRT toolchain was built. Almost everything went well, but LAN2 still doesn't work!  Hopefully, the clever people at OpenWRT will work out why!

cheers, a
Logged
Pages: 1 [2] 3 4