Hi all.Just an update on my BT Hub problem.I had a NTE5 faceplate fitted on Wednesday which worked fine for the Voyager 2500v so out of curiosity I thought I will give the Hub one more try although BT are sending me a replacement and guess what,it has been working fine ever since I connected,Still low speeds but I will give it the three days to see what happens.My only concern is I am still getting an awful lot of errors as you can see
Uptime: 2 days, 8:38:00
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 160
Data Transferred (Sent/Received) [MB/MB]: 13.24 / 78.09
Output Power (Up/Down) [dBm]: 11.5 / 11.5
Line Attenuation (Up/Down) [dB]: 26.0 / 45.0
SN Margin (Up/Down) [dB]: 23.0 / 27.0
Vendor ID (Local/Remote): TMMB / ALCB
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 39 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 7,910 / 0
FEC Errors (Up/Down): 0 / 4,726,348
CRC Errors (Up/Down): 0 / 367,664
HEC Errors (Up/Down): 0 / 142,456
The problem is I cannot get any information on why these errors occur or in what direction to go to find a remedy ie:- would it still be a problem with the hub or is it a line problem causing them?As usual any help would be most appreciated.