Hi
Thanks for all the replies. jimbobaggies: sorry, I should have said that I already have the address of Manchester University time server set, viz
[ sntpc.ini ]
add addr=130.88.200.4 version=3
config poll=60 pollpresync=5
config state=enabled
However, I've rechecked the user.ini file on the router and discovered this:
[ system.ini ]
settime timezone=+00:00 daylightsaving=disabled
but my backup file saved several days ago shows daylightsaving=enabled.
Using Telnet and the CLI to set it appears to work until the computer is rebooted when it's once again off, so it must be bugged.
Leo: I'm a Zen user and use Thomson/SpeedTouch kit on ISP advice, and very good it is too for maintaining good sync rates. Hope to hear from you.