Thanks i know you felows are smart , but you are incorrect i followed the
2) When powered up, a press, hold for an excess of (say) ten second and release of the reset button will revert the device to its default configuration and initiate a device reboot. i say a couple time s as incorrect my settings are not reset at all so
1, i remove the path ptm1.10 thats the profile right ... then do the reboot
2. my ISP vlan is not in correct no is connection mode or bridge type 802.1q & p values wrong ?? i filled these entered credentials
all other settings are as i left them ,, qos of etc so i filled these in vlan tag 101 value 2
my router which is NETDUMAR1 brand new ,, now connected via
HG612 lan1 > wan R1 router /port netdumaR1 > lan 2 hg612 > port R1 > port r1 >pc
i then wiped sudo killall -hub mDNSResponder in terminal recreated a ppoe location
and started the HG12 and i am very pleased to say it only has taken me a week to get this going with your help of course really pleased
there is no way over the last few days i tried anything different this is new vdsl line ?? new isp
thankyou all again