Hi All,
I've just upgraded my Pi from Raspbian 7 (wheezy) to 8 (jessie). I'd previously been running DSLstats uploading to MyDSLWebStats without a problem. I'd been running the pre-release version 5.8.4 and 5.8.5 without any problems at all.
However, after re-installing DSLstats I'm getting an error logging into the HG612 regarding the second stage login failure. I've tried logging into the HG612 manually and it's completely fine.
The output in the event log is as follows:
04 Oct 2016 12:11:38 Recording started
04 Oct 2016 12:11:41 *** Second stage login failure. Did you enable the option "Requires command to enter shell" by mistake?
04 Oct 2016 12:11:41 Second stage login failed.
I've double-checked that the HG612 is selected from the drop-down box, and I know that the "Requires command to enter shell" box is checked for this modem. I tried deleting everything and reverting to 5.8.4 and 5.8.0 and it also failed with the same error message.
I noticed when logging into the HG612 manually there was a 3-4 second pause after entering the "sh" command. Not sure if that's normal or causing it to timeout?
Any thoughts or suggestions?