Thanks Kitz, I always turn off the HH5 overnight and when not in use. Is this bad practice in relation to line training ?
The HH5 was off from 1am to nearly 1pm today.
Here is the result of the BT Wholesale further diags:
Here is the HH5 WAN log
12:51:16, 30 Aug. ( 103.910000) WAN operating mode is VDSL
12:51:16, 30 Aug. ( 103.910000) Last WAN operating mode was VDSL
12:51:15, 30 Aug. ( 102.510000) PPP IPCP Receive Configuration ACK
12:51:15, 30 Aug. ( 102.480000) PPP IPCP Send Configuration Request
12:51:15, 30 Aug. ( 102.480000) PPP IPCP Receive Configuration NAK
12:51:15, 30 Aug. ( 102.450000) PPP IPCP Send Configuration ACK
12:51:15, 30 Aug. ( 102.450000) PPP IPCP Receive Configuration Request
12:51:15, 30 Aug. ( 102.450000) PPP IPCP Send Configuration Request
12:51:14, 30 Aug. ( 101.220000) PPPoE is up - Down Rate=2696000Kbps, Up Rate=1296000Kbps; SNR Margin Down=31.9dB, Up=16.1dB
12:51:14, 30 Aug. ( 101.210000) CHAP authentication successful
12:51:14, 30 Aug. ( 101.100000) CHAP Receive Challenge
12:51:14, 30 Aug. ( 101.100000) Starting CHAP authentication with peer
12:51:14, 30 Aug. ( 101.100000) PPP LCP Receive Configuration ACK
12:51:13, 30 Aug. ( 101.070000) PPP LCP Send Configuration Request
12:51:13, 30 Aug. ( 101.070000) PPP LCP Receive Configuration Reject
12:51:13, 30 Aug. ( 101.050000) PPP LCP Send Configuration ACK
12:51:13, 30 Aug. ( 101.040000) PPP LCP Receive Configuration Request
12:51:13, 30 Aug. ( 101.040000) PPP LCP Send Configuration Request
12:51:01, 30 Aug. ( 88.790000) PTM over DSL is up
12:50:12, 30 Aug. ( 39.370000) WAN Auto-sensing running.
21:31:48, 29 Aug. ( 139.960000) WAN operating mode is VDSL
21:31:48, 29 Aug. ( 139.960000) Last WAN operating mode was VDSL
21:31:46, 29 Aug. ( 138.530000) PPP IPCP Receive Configuration ACK
21:31:46, 29 Aug. ( 138.510000) PPP IPCP Send Configuration Request
21:31:46, 29 Aug. ( 138.500000) PPP IPCP Receive Configuration NAK
21:31:46, 29 Aug. ( 138.480000) PPP IPCP Send Configuration ACK
21:31:46, 29 Aug. ( 138.480000) PPP IPCP Receive Configuration Request
21:31:46, 29 Aug. ( 138.480000) PPP IPCP Send Configuration Request
21:31:45, 29 Aug. ( 137.250000) PPPoE is up - Down Rate=2496000Kbps, Up Rate=800000Kbps; SNR Margin Down=32.8dB, Up=18.9dB
I noticed some blocking on the 'All' log. Could the speed be reduced due to invalid packets ?
Event Log
13:14:35, 30 Aug. ( 1487.310000) Admin login successful by 192.168.1.64 on HTTP
13:14:29, 30 Aug. ( 1481.570000) New GUI session from IP 192.168.1.64
13:10:21, 30 Aug. BLOCKED 1 more packets (because of First packet is Invalid)
13:10:19, 30 Aug. OUT: BLOCK [65] First packet is Invalid (Invalid tcp flags for current tcp state: TCP [192.168.1.64]:50271->[173.1.218.6]:80 on ppp3)
13:09:59, 30 Aug. OUT: BLOCK [65] First packet is Invalid (Invalid tcp flags for current tcp state: TCP [192.168.1.64]:50129->[199.38.164.47]:80 on ppp3)
13:09:59, 30 Aug. BLOCKED 4 more packets (because of First packet is Invalid)
13:09:57, 30 Aug. OUT: BLOCK [65] First packet is Invalid (Invalid tcp flags for current tcp state: TCP [192.168.1.64]:50111->[185.31.128.208]:80 on ppp3)
13:09:56, 30 Aug. OUT: BLOCK [65] First packet is Invalid (Invalid tcp flags for current tcp state: TCP [192.168.1.64]:50088->[193.0.160.219]:80 on ppp3)
13:09:41, 30 Aug. OUT: BLOCK [65] First packet is Invalid (Invalid tcp flags for current tcp state: TCP [192.168.1.64]:50055->[173.1.218.6]:80 on ppp3)
13:09:10, 30 Aug. OUT: BLOCK [65] First packet is Invalid (Invalid tcp flags for current tcp state: TCP [192.168.1.64]:49844->[173.1.218.6]:80 on ppp3)
12:54:32, 30 Aug. IN: BLOCK [15] Default policy (TCP [131.253.61.82]:443->[86.137.212.116]:49203 on ppp3)
12:51:57, 30 Aug. IN: BLOCK [16] Remote administration (ICMP type 8 code 0 198.20.99.130->86.137.212.116 on ppp3)
12:51:55, 30 Aug. IN: BLOCK [15] Default policy (TCP [66.193.112.93]:443->[86.137.212.116]:46518 on ppp3)
12:51:54, 30 Aug. ( 126.900000) CWMP: session completed successfully
12:51:54, 30 Aug. ( 126.210000) CWMP: HTTP authentication success from
https://pbthdm.bt.mo12:51:52, 30 Aug. OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_ath13_out/rule/0: ICMPv6 type 143 code 0 fe80:0000:0000:0000:20f2:01ff:fe0a:e2cf->ff02:0000:0000:0000:0000:0000:0000:0016 on ath13)
12:51:33, 30 Aug. ( 120.940000) NTP synchronization success!
12:51:27, 30 Aug. ( 114.160000) CWMP: Server URL:
https://pbthdm.bt.mo; Connecting as user: ACS username
12:51:27, 30 Aug. ( 114.160000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
12:51:27, 30 Aug. ( 115.060000) NTP synchronization start