I'm using DTM and RouterStats to monitor my DGN2200 (v4) router with amod firmware. They're both working fine, but I don't quite like them, for different reasons.
I now found DSLstats, and would like to use it because I really like the GUI and all the features.
I tried setting it up like I did for DTM and RouterStats but it's not working.
I think Telnet authentication is ok, because I don't receive errors in that phase, but when sampling starts, after a while I receive the message: "
No data returned in latest sample".
I'm using a custom firmware, called amod (
http://alfie.altervista.org/amod2200V4/), which enables telnet by default, allows to save SNR modifications permanently, implements pppoe-relay and a bunch of other nice features.
The telnet prompt string (when I telnet via terminal) is:
DGN2200V4 / #The adsl control commands available from shell are: adsl, adslctl,
xdslctl. adsl and adslctl are symlinks to xdslctl.
In DSLstat's "telnet->connection stats" I expected to log telnet data, but it's empty. I don't know if there's another way to debug what DSLstats is sending/receving.
Here's an example of stats I can read from telnet:
DGN2200V4 / # adslctl info
xdslctl.orig: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 8000
Last initialization procedure status: 0
Max: Upstream rate = 1113 Kbps, Downstream rate = 14816 Kbps
Bearer: 0, Upstream rate = 1106 Kbps, Downstream rate = 13230 Kbps
DGN2200V4 / # adslctl info --show
xdslctl.orig: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 8000
Last initialization procedure status: 0
Max: Upstream rate = 1113 Kbps, Downstream rate = 14748 Kbps
Bearer: 0, Upstream rate = 1106 Kbps, Downstream rate = 13230 Kbps
Link Power State: L0
Mode: ADSL2+
TPS-TC: ATM Mode
Trellis: U:ON /D:OFF
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 7.1 6.9
Attn(dB): 30.0 18.8
Pwr(dBm): 19.1 12.1
ADSL2 framing
Bearer 0
MSGc: 58 14
B: 59 13
M: 4 16
T: 7 8
R: 14 12
S: 0.5791 6.4218
L: 3509 294
D: 32 8
Counters
Bearer 0
SF: 454155 458735
SFErr: 427 0
RS: 50865195 284853
RSCorr: 9524836 0
RSUnCorr: 436 0
Bearer 0
HEC: 327 0
OCD: 0 0
LCD: 0 0
Total Cells: 229785163 19207523
Data Cells: 31505886 14495885
Drop Cells: 0
Bit Errors: 0 0
ES: 4041 9
SES: 591 2
UAS: 903 903
AS: 7364
Bearer 0
INP: 0.50 1.00
INPRein: 0.00 0.00
delay: 5 13
PER: 16.21 16.05
OR: 31.57 9.96
AgR: 13210.75 1111.86
Bitswap: 655/655 1/1
DGN2200V4 / #
Thanks for any help you might give me to make it work with my setup.