As a follow up to this post here:
http://forum.kitz.co.uk/index.php?topic=14183.msg266556#msg266556I've recently re-synced with the exchange at a much lower speed than normal. I used to get 18/2.
Here are my current stats.
Stats recorded 19 Jul 2014 15:28:05
DSLAM/MSAN type: Not reported by modem
Modem/router firmware: AnnexA version - A2pD030g.d22j
DSL mode: ADSL2+
Status: Showtime
Uptime: 7 min 11 sec
Resyncs: 0 (since 19 Jul 2014 13:42:24)
Downstream Upstream
Line attenuation (dB): 28.0 32.8
Signal attenuation (dB): 28.0 33.4
Connection speed (kbps): 5392 339
SNR margin (dB): 12.4 8.2
Power (dBm): 0.0 12.8
Interleave depth: 32 1
INP: 1.05 0.60
RSCorr/RS (%): 0.1194 0.0307
RSUnCorr/RS (%): 0.0049 0.0000
ES/hour: 0 0.47
I would like to note a couple of strange things. It's not reporting the dslam/msan current where it has before. I believe it started with an I.
Also my attenuation seems to change (Which from what I read is impossible?) Here is the log from today
Down Up
19 Jul 2014 13:42:30 28.0 35.6
19 Jul 2014 13:45:05 28.0 35.9
19 Jul 2014 13:49:05 28.0 35.0
19 Jul 2014 14:06:05 28.0 35.2
19 Jul 2014 14:14:06 10.5 4.9
19 Jul 2014 14:34:05 10.5 5.0
19 Jul 2014 14:37:05 28.0 34.8
19 Jul 2014 15:21:05 28.0 32.8
If anyone wants any specific graph or any other information I will gladly oblige.
It just re-synced after I posted this message. Here's the connection information with a lower attenuation
Stats recorded 19 Jul 2014 15:40:05
DSLAM/MSAN type: Not reported by modem
Modem/router firmware: AnnexA version - A2pD030g.d22j
DSL mode: ADSL2+
Status: Showtime
Uptime: 3 min 47 sec
Resyncs: 0 (since 19 Jul 2014 13:42:24)
Downstream Upstream
Line attenuation (dB): 10.5 4.9
Signal attenuation (dB): 10.5 4.8
Connection speed (kbps): 15975 1268
SNR margin (dB): 12.0 6.5
Power (dBm): 0.0 11.9
Interleave depth: 192 1
INP: 1.06 0
RSCorr/RS (%): 0.0000 N/A
RSUnCorr/RS (%): 0.0000 N/A
ES/hour: 0 0.60
My QLN is exactly the same as in the previous topic though...