Support this site
Home
Broadband
ISPs
Tech
Routers
Wiki
Forum
Rate your ISP
Glossary
June 05, 2024, 07:44:17 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Search
Login
Register
Kitz Forum
>
Broadband Related
>
Broadband Hardware
>
Fibre Optic and Homeplug setup
« previous
next »
Pages: [
1
]
Print
Author
Topic: Fibre Optic and Homeplug setup (Read 4994 times)
pcombo
Just arrived
Posts: 4
Fibre Optic and Homeplug setup
«
on:
October 14, 2013, 02:45:08 PM »
I have fibre optic broadband but my modem is attached to a home plug and the router is up stair attached to another home plug.
When i checked with sky they estimated i could get 70mb, but i am only on a 40mb circuit which is fine, but am only getting 20-24mb.
Would this setup give me a slower speed.
Logged
roseway
Administrator
Senior Kitizen
Posts: 43772
Penguins CAN fly
Re: Fibre Optic and Homeplug setup
«
Reply #1 on:
October 14, 2013, 02:53:52 PM »
Yes, very probably. You didn't mention the rated speed of the homeplugs, but however fast they are theoretically, the actual speed will always be less. How much less depends on how your home wiring is arranged.
Logged
Eric
pcombo
Just arrived
Posts: 4
Re: Fibre Optic and Homeplug setup
«
Reply #2 on:
October 14, 2013, 03:12:03 PM »
Hi, Forgot to say.
http://www.amazon.co.uk/Value-200Mbps-Home-Plug-Double/dp/B001AIKBB4/ref=sr_1_3?ie=UTF8&qid=1381759903&sr=8-3&keywords=home+plugs
Thats the plugs i have.
Logged
broadstairs
Kitizen
Posts: 3703
Re: Fibre Optic and Homeplug setup
«
Reply #3 on:
October 14, 2013, 04:41:34 PM »
I'd agree with Eric, you are unlikely to get much more than that over these plugs. You would need the good quality 500mbps plugs to get better but then you wont usually get maximum speeds.
Stuart
Logged
ISP:Vodafone Router:Vodafone Wi-Fi hub FTTP
Howlingwolf
Reg Member
Posts: 107
Re: Fibre Optic and Homeplug setup
«
Reply #4 on:
October 14, 2013, 08:55:52 PM »
Indeed. The best you are going to get from these devices is somewhere around 80-90% of quoted maximum. They are also known to cause interference with adsl signalling so they might be impacting your vdsl line speed as well.
Logged
One2Go
Member
Posts: 19
Re: Fibre Optic and Homeplug setup
«
Reply #5 on:
October 23, 2013, 12:11:09 PM »
mine from BT (Arcnet) i believe it is 200mb never reaches 40mb the best i got was 30 or less.
Logged
Was on 5mb, now on 60mb on 80/20. stable never had a major issue
bbnovice
Reg Member
Posts: 267
Re: Fibre Optic and Homeplug setup
«
Reply #6 on:
October 23, 2013, 05:55:44 PM »
I used to be a fan of Homeplugs and used them extensively on my home network instead of wireless. I did not use use wireless because of distance and wall thickness issues and problems getting a Sky Wireless Connector to work reliably.
However what I did not realise was the interference they were causing on my FTTC connection. This did not come to light until an OR engineer conducted a series of tests on my premises whilst troubleshooting cabling problems within the external OR network. He demonstrated to me that the number of errors reported dropped significantly when
some
of the Homeplugs were turned off. Luckily the main fault was located out in the OR network so I was not charged for this bit of detective work.
The Homeplug that was connected to the Sky HD box was the main culprit. Turning off other Homeplugs had no/minimal impacts on the error counts. I recollect reading elsewhere on other forums (don't ask me where as this was some time ago) that the Homeplug/Sky HD Box combo was a well known source of potential issues. The inference I drew from this is that the item of equipment connected to the Homeplug may be just as relevant as the Homeplug itself along with the the state of the internal house wiring.
As consequence I reluctantly ditched the Homeplugs, and went 100% wireless and put up with some of the drawbacks.
What I would suggest you consider is an approach where you initially commit to 2 Homeplugs only, and then monitor the error rates before and after deployment. You may get lucky and find the Homeplugs have no impact at all.
BTW I was using 85Mbs Homeplugs from ADDON (model HP0850v4) throughout. Admittedly these are at the cheaper end of the market but are widely available from a number of sources.
Regards BBN
Logged
One2Go
Member
Posts: 19
Re: Fibre Optic and Homeplug setup
«
Reply #7 on:
October 24, 2013, 09:44:16 PM »
cheaper equal trouble for sure. but with interferences it is very difficult to pinpoint the culprit because it is usually a combination of many factors and you would need to have everything off and start turning one item at a time in order to find out the real criminal. and repeating it again at different times. sometimes outside main power over head cables can cause headache ... Nothing beats a wired network no matter how messy it maybe. Cat5e are so cheap that you can get 50 meters for under 20 pounds.
Logged
Was on 5mb, now on 60mb on 80/20. stable never had a major issue
Print
Pages: [
1
]
« previous
next »
Kitz Forum
>
Broadband Related
>
Broadband Hardware
>
Fibre Optic and Homeplug setup