I think so asbo because single line executions dont work?
Single line executions?
What happens if you write a shell script..
#!/bin/sh
blahblah commands
save the script under the name
myscript.sh to the ramdisk volume, mounted under
/var or
/tmp or wherever
set its executable bit with
chmod +x myscript.shand then using the DGTeam configuration tool set it so that the script invokes on re-connects
if the tool lets you run a binary like
adslcmd it should let you execute a shell script too
do you know what to enter for SNR values as mentioned above? if i want 35% of the TSNRM what do I enter as the value?
Just 35% of what it was before? I'm not sure I'm so brave
Below the Target SNRM is re-adjusted to 60% of its former value..
Before......
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 8000
Max: Upstream rate = 1196 Kbps, Downstream rate = 19352 Kbps
Path: 0, Upstream rate = 1020 Kbps, Downstream rate = 17223 Kbps
Link Power State: L0
Mode: ADSL2+
TPS-TC: ATM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.4 12.0
Attn(dB): 19.0 9.7
Pwr(dBm): 20.8 12.1
# xdslcmd configure --snr 60
xdslCtl_GetVersion success
[..resyncs..]
Afterwards......
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 8000
Max: Upstream rate = 1188 Kbps, Downstream rate = 20716 Kbps
Path: 0, Upstream rate = 1020 Kbps, Downstream rate = 18774 Kbps
Link Power State: L0
Mode: ADSL2+
TPS-TC: ATM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 3.8 11.3
Attn(dB): 19.0 9.8
Pwr(dBm): 20.8 11.8
Another 1.5Mbps is squeezed out of the (TalkTalk LLU) line, but at the expense of a soaring error count..
cheers, a
EDIT:
oh what the heck.. so this is 35% of 60% of the original TSNRM.. Not bad for a 1000 metre local loop...
# xdslcmd configure --snr 35
xdslCtl_GetVersion success
[..resyncs..]
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 8000
Max: Upstream rate = 1200 Kbps, Downstream rate = 21696 Kbps
Path: 0, Upstream rate = 1020 Kbps, Downstream rate = 19944 Kbps
Link Power State: L0
Mode: ADSL2+
TPS-TC: ATM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 2.3 12.0
Attn(dB): 18.5 9.7
Pwr(dBm): 0.0 12.3
ADSL2 framing
Path 0
MSGc: 59 10
B: 123 145
M: 2 1
T: 5 1
R: 6 0
S: 0.3972 4.5447
L: 5115 257
D: 64 1
Counters
Path 0
SF: 8996 7989
SFErr: 0 0
RS: 1461578 0
RSCorr: 13232 0
RSUnCorr: 0 0