Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[les-70]

  Thanks for the info, and yes I tried, and had the red light!  I don't know how you could make a script run from config on boot.  It is easy to automate and command file to login into the router a change things though.

[broadstairs]

    3. If that works you may/should have telnet access with login of !!Huawei  / @HuaweiHgw

Well I tried telnet and it asks for user & pw but neither of these worked which ever combination I tried, which is supposed to be the user andme and which the p/w?

Stuart

Edit: I just tried the 11.txt file and cant login in as it wonr respond to the IP.

[les-70]

  The user name is   !!Huawei   and the password  @HuaweiHgw  .  The 11.txt worked for me, if not try the one in http://forum.kitz.co.uk/index.php?topic=14185.msg273357#msg273357 .   As I have commented I no longer have standard TT firmware and can't do proper tests myself, I rely on reports and only npr has given much feedback.

 I have some older files which worked for npr but were removed as they needed some manal settings to allow TT firmware updates to be enabled.   

[kitzuser87430]

user & pw

If you change the password for the admin (gui) login......then the  telnet password for the username   "!!Huawei" becomes the new password.

I used the conf attached
(Default ip address)
Ian

[broadstairs]

Well I cannot get the HG635 to respond to any IP address I've tried with that 11.txt file loaded as a config. I also tried a reset via the button on the back and still it does not seem to work.

Stuart

[les-70]

   It definitely won't work after a reset.  That will take you back to TT firmware defaults. 

The config file just needs to be uploaded and will survive reboots but not a reset.  The gui and telnet should both be on 192.168.1.1 with that file.  The O1 file should give IP 192.168.0.1. (unless I miss labeled them) The gui login is the usual admin/admin.   I can only suggest trying other one I suggested.   There is also the one kitzuser87430 has provided but he may have altered the password??

[broadstairs]

I tried the 01 file and that worked but telnet did not take the user/password. So I thought I'd try the 11 file but once loaded I could not find the router via the ethernet cable (only my laptop connected via cable and wireless off). So I thought I'd try a hard reset to get back to TT defaults but that has not worked either unless I'm not doing the hard reset correctly. Still the router is not showing up and the IP given to my laptop is .0.253.

Stuart

[les-70]

  A hard reset has always worked for me but I find the reset button a bit unreliable and needing the right length of push what ever that might be! I think the gui may be the best way to do it.   A port scan should find the HG635 maybe 0.254 if the laptop is 0.253


  Try the other file I mentioned "new downloadconfigfile.txt" that should be 1.1 and was an earlier quiet separate but less tested version.  I used a personalised 01 but will try the 11 file myself tomorrow, as I said there have been a few files to try but no reports of which ones people find work OK or have trouble with. As a result things are not as I would like.   I am baffled re it not taking the user/password -- as is normal it is case sensitive. 

  edit you havn't got a fixed ip of 0.253 on the laptop have you?

[broadstairs]

you haven't got a fixed ip of 0.253 on the laptop have you?

I feel an idiot now, yes I had set that when I was playing with the HG612 so as to make sure when I connected it to the lan it did not conflict with the ZyXEL.

Now I will try again with those files....

Stuart

[broadstairs]

Now I have corrected my settings I tried again with the 01 file and yes I can get the stats OK from telnet. So now I'll set it up so it can be used in place of the ZyXEL and the HG612 later in the week.

Stuart

[les-70]

  When it is online do check with a shields up that all is in stealth.  Somewhere in those files there seems to be memory that port 23 can also also be used for remote update over the WAN.  If port 23 is open on the WAN it seems to be open for TR-069 and not quite the severe risk it first seems. I have had trouble with that issue since I set TR-069 enabled so as insure updates would occur.  An update to 1.06t is supposed to be due and I think after that I will upload a version with no TR-069

I found the HG635 to be more like the Xyxel than the HG612 and you can't cap speeds on the HG635 - it is not supported.  I am hoping it might be in the update which is due.  With telnet you will be able to decide for self what the performance is like.  I hate anything locked down!!

[npr]

There's hints that TT have started pushing out firmware v1.06t
https://community.talktalk.co.uk/t5/TalkTalk-Labs-Trials/Fancy-taking-part-in-the-Huawei-HG635-v1-05t-Firmware-Trial/td-p/1430031/page/3

[kitzuser87430]

TT have started pushing out firmware v1.06t

Yep.....tried to log into the gui this morning...locked out.....reboot....v1.06

Config not changed (on plusnet ADSL) grc shields up scan .....passed full stealth


Now to test the wifi stability

IAn

[broadstairs]

Does anyone know yet if you can still get stats via telnet using one of the alternative config files on the 1.06 firmware?

Stuart

[kitzuser87430]

if you can still get stats via telnet

Yes .....nothing changed at all with my config.

In fact the stats were harvested all night (ppp/internet dropped at 01:00) and I presume the gui was locked out at that time.

Ian