HI
I dont know much about this sort of thing so i'll try explain it as best as I can
I have a NTE5 faceplate on my master socket(and only socket) with the BT logo on the top left, I read on this forum about removing the bell wire to see if it would help much on the signal, so I took off the lower part of the face plate and i thought there would be wires connected to it but there is none so im not sure where the bell wire would be as I cant see any other wires in the box unless I screw off the main socket. I have checked the guides here and on other web sites and they all say to remove the bell wire from the terminals but no wires are on the face plate terminals.....
so I think im looking at the wrong place.
I was going to buy the I Plate so that would sort it out anyway but read that it doesnt filter the sockets so would I be able to get the I Plate and instead of putting back on the original face plate add on a MODIFIED BT Engineers' ADSL Filter/Splitter Faceplate for NTE5 Master boxes from Clarity.it ?? or would that be too much add ons?
Im confused lol
JJ