Since last night DLM made a change on the line overnight resync at 1am. I did noticed Bearer 0 INP and INPRein has changed from 550/540 0.00/0.00 to 641/607 10.00/2.00. Is that good or bad? I have checked speedtest via thinkbroadband link here:
https://www.thinkbroadband.com/speedtest/1632214903751253755DSLAM type / SW version: BDCM:0xc190 (193.144) / v0xc190
Modem/router firmware: AnnexA version - A2pvfbH043q.d26u
DSL mode: G
Status: Showtime
Uptime: 8 hours 49 min 40 sec
Resyncs: 1 (since 21 Sep 2021 01:04:48)
Downstream Upstream
Line attenuation (dB): 38.8 0.0
Signal attenuation (dB): 38.8 0.0
Connection speed (kbps): 215072 34427
SNR margin (dB): 3.1 3.1
Power (dBm): 0.0 4.0
Interleave depth:
INP: 641.00 607.00
G.INP: Not enabled Not enabled
Vectoring status: Unknown
xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 34483 Kbps, Downstream rate = 214416 Kbps
Bearer: 0, Upstream rate = 34427 Kbps, Downstream rate = 215072 Kbps
Link Power State: L0
Mode: G.fast Annex A
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 3.1 3.1
Attn(dB): 38.8 0.0
Pwr(dBm): 0.0 4.0
Bearer 0
INP: 641.00 607.00
INPRein: 10.00 2.00
delay: 0 0
PER: 0.00 488.34
OR: 452.01 166.66
AgR: 22649.43 18693.49