The other two properties will be fed from Linden Avenue. I'm hoping it will be completed by autumn as that's when my contract is up for renewal.
Are you sure about that?
That's not what BlackSheep said earlier in the thread.
It's nice to wonder how it may pan out ... but I can tell you in no uncertain terms, there will be ductwork going from the box at the base of DP92 on Crow Hill, to a new JF4 outside what they are calling premises A1, from here it is then ducted directly to premises A3. So, two premises will be fed via Crow Hill.
Premises A2 will be fed via Linden Av and will see two new JF4's built on either side of the road, as the duct will run up to No.16 Linden Av, then cross the road .... then into A2 premises.
No overhead, all underground.
Looking again at the BT Wholesale Checker I can see that 28a Crow Hill is marked as FTTP planned with availability date of 27th May.
11a Linden Avenue show availability on 28th May.
That would match with BS comments and they would be the 2 properties fed from Crow Hill.
I assume the 3rd property (from reading the planning application) is 13 Linden Avenue. That currently shows no FTTP availability date. This again matches BS comments and would make sense as 13 Linden Avenue is an existing property showing FTTC availability.
The new properties must have full fibre according to the planning application.
Broadstairs Neighbourhood Plan Policies
BSP12 - Full Fibre Broadband Connections
As number 13 Linden Avenue is an existing property and already has a phone line with FTTC available they are already served by OpenReach.
Number 13 may be enabled for FTTP at the same time as the rest of the street, or the checker is just missing that info.
AFAIK this fibre will become part of the roll out here we just need the stuff installed up the pole which is happening quite near to us..
Definitely.
You will share the same fibre/splitter node as 28a if you are next door.
PS - not certain of your own premises address but No.24 is where 2 splitter-nodes meet.
The Splitter installed to serve 28a will serve up to 30 other properties.
It just needs fibre fed from the Splitter to a CBT on your pole and you're ready to order.