Thanks guys got my fingers crossed i don't mess anything up
So here's all the infomation i've gathered so far
1. Login to a telnet session with username: admin/1234 to recover the "supervisor" password by a dumpmdm command
2. Login to the Supervisor account via GUI go to the Maintenance > Configuration page. Select the ROM-D tab and then left-click on the Clean button.
3. Update the FW to the one Weaver gave to 1312-B10A-AAJZ16-SNRM-log.bin
4. Factory reset by the pin at the back
5. Set it up
Anything else im missing?