It was actually all the way down to 300k downstream yesterday, because I had pushed the target SNRM all the way right up to 12dB in an attempt to put a stop to its constant resynching. It’s back up to where it should be now, at 2.68Mbps d/s @ dB SNRM.
Unplugged the modem from the line so AA could do some more tests.
Today 10:05:02 Today 13:05:02 Management review TR H18KKT needs a review @aa
Today 09:59:45 Track PSTN Fault 5-7-168934119702 Informational Message: 4058 Notification Only - Fault is assigned to Engineer. Fault status is now PONR. bt
Today 09:59:45 Track PSTN Fault 5-7-168934119702 Estimated Response Time: 2018-12-11T23:59:59 bt
Today 09:59:45 Track PSTN Fault 5-7-168934119702 Status: Open - Past PONR bt
Today 09:47:59
Today 09:46:49 Tomorrow 09:46:49 Track fault and update customer PSTN Fault - NSY @aa
Today 09:46:49 Tomorrow 09:46:49 Wait for supplier to confirm fault cleared PSTN Fault - NSY @aa
Waiting on faultbtconfirm Wait customer confirms fault closed PSTN Fault - NSY @aa
Today 08:40:10 Today 17:00:00 ToDo Check Line since an SNR Reset was run @aa
Today 10:05:02 Today 13:05:02 Management review TR H18KKT needs a review @aa
Today 09:59:45 Track PSTN Fault 5-7-168934119702 Informational Message: 4058 Notification Only - Fault is assigned to Engineer. Fault status is now PONR. bt
Today 09:59:45 Track PSTN Fault 5-7-168934119702 Estimated Response Time: 2018-12-11T23:59:59 bt
Today 09:59:45 Track PSTN Fault 5-7-168934119702 Status: Open - Past PONR bt
Today 09:47:59 Track PSTN Fault 5-7-168934119702 Notes Field:
**Line Stability:
**Network Stability:
**Test Outcome: Fail
**MFL: LN
**Term Statement: LINE TERMINATION DETECTED
**Line Signature:
**Distance to Fault: 0
**Cable length: 8.05
**Test Start Time: 2018-12-10T09:47:52
**Test Stop Time: 2018-12-10T09:47:52 bt
Today 09:47:59 Track PSTN Fault 5-7-168934119702 Informational Message: 4465 Please refer to the Notes field for the actual message bt
Today 09:47:59 Track PSTN Fault 5-7-168934119702 Estimated Response Time: 2018-12-11T23:59:59 bt
Today 09:47:59 Track PSTN Fault 5-7-168934119702 Status: Open - Associating Info bt
Today 09:47:09 Track PSTN Fault 5-7-168934119702 Informational Message: 4040 Notification only - Estimated Response Time. bt
Today 09:47:09 Track PSTN Fault 5-7-168934119702 Informational Message: 3100 Trouble Report Accepted bt
Today 09:47:09 Track PSTN Fault 5-7-168934119702 Estimated Response Time: 2018-12-11T23:59:59 bt
Today 09:47:09 Track PSTN Fault 5-7-168934119702 Status: Open - New bt
Today 09:46:56 Track PSTN Fault 5-7-168934119702 Message Informational 9323 The asset care level 2.5 will be applied rather than the specified service level. bt
Today 09:46:56 Track PSTN Fault 5-7-168934119702 Message Informational 3241 Notification Only - Trouble Report Creation Request is Pending bt
7 Dec 15:05:02 Today 09:58:46 Management review TR H18KKT needs a review @aa
Today 09:46:28 WLR3Test NSY dys00556dat01:142978817: Fail FAULT - Battery Contact ServiceLevel:2.5, MainFaultLocation:LN, FaultReportAdvised:Y, AppointmentRequired:N, LineStability:, NetworkStability:, StabilityStatement: @aa
Today 09:45:27 WLR3Test WLR3_CIDT_Test dys00556app04:426519159: Fail FAULT - Battery Contact ServiceLevel:2.5, MainFaultLocation:LN, FaultReportAdvised:Y, AppointmentRequired:N, LineStability:, NetworkStability:, StabilityStatement: @aa
Today 08:43:14 WLR3Test WLR3_CIDT_Test dys00556dat01:142960265: Fail FAULT - Battery Contact ServiceLevel:2.5, MainFaultLocation:LN, FaultReportAdvised:Y, AppointmentRequired
Does that say 8.05 km? Really?
So, BatteryContact again.
And we talked about this before: why “The asset care level 2.5 will be applied rather than the specified service level” ? I can’t remember what we said that was all about.