Following on from my thread where I may have a suspected issue with a Netgear D7000, Mine line profile has dropped and appears to be stuck again.
This happened back in January and as it was below my expected rates, Zen sent an engineer out to check my line which was then reset. It didn't want to recover from sitting at a level below what it normally sits for several months.
The issue re-occured and my Max is now sitting at 60,341 with a sync rate of 54999. It also has a SNR of 7.4dB where it normally sits around 3.2dB.
My question is, Can I manually force the DLM to kick by several disconnects of the router or would that be pointless?