First an update G-INP has been applied with a very modest speed increase, and interleaving depth is now 8/1.
G-INP and Connection Stats follow.
Downstream Upstream
General
rtx_tx 39 0
rtx_c 39 0
rtx_uc 0 0
LEFTRS 1 0
minEFTR 20733 0
errFreeBits 6330422 0
Bearer 0
RxQueue 16 0
TxQueue 8 0
G.INP Framing 18 0
G.INP Lookback 8 0
RRC Bits 0 24
Interleave depth 8 1
INP 43.00 0.00
INPRein 0.00 0.00
Delay 0 0
Bearer 1
Interleave depth 1 0
INP 2.50 0.00
INPRein 2.50 0.00
Delay 0 0
==============================================================
adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 5594 Kbps, Downstream rate = 21183 Kbps
Bearer: 0, Upstream rate = 5594 Kbps, Downstream rate = 20737 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.4 6.3
Attn(dB): 26.4 0.0
Pwr(dBm): 11.8 6.3
VDSL2 framing
Bearer 0
MSGc: -6 26
B: 235 175
M: 1 1
T: 0 38
R: 14 14
S: 0.3622 0.9980
L: 5522 1523
D: 8 1
I: 250 95
N: 250 190
Q: 8 0
V: 1 0
RxQueue: 16 0
TxQueue: 8 0
G.INP Framing: 18 0
G.INP lookback: 8 0
RRC bits: 0 24
Bearer 1
MSGc: 90 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 10.6667 0.0000
L: 24 0
D: 1 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 362628
OHFErr: 0 1
RS: 222352760 3692510
RSCorr: 463 2
RSUnCorr: 0 0
Bearer 1
OHF: 1258396 0
OHFErr: 0 0
RS: 7550008 0
RSCorr: 6 0
RSUnCorr: 0 0
Retransmit Counters
rtx_tx: 45 0
rtx_c: 45 0
rtx_uc: 0 0
G.INP Counters
LEFTRS: 1 0
minEFTR: 20733 0
errFreeBits: 6387300 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 806067206 0
Data Cells: 5836847 0
Drop Cells: 0
Bit Errors: 0 0
Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0
ES: 13 6
SES: 10 0
UAS: 3428 3418
AS: 20216
Bearer 0
INP: 43.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 9.51
OR: 0.01 26.89
AgR: 20769.93 5621.15
Bearer 1
INP: 2.50 0.00
INPRein: 2.50 0.00
delay: 0 0
PER: 16.06 0.01
OR: 47.81 0.01
AgR: 47.81 0.01
Bitswap: 418/418 530/530
Total time = 16 hours 56 min 33 sec
FEC: 61869 15
CRC: 1790 7
ES: 13 6
SES: 10 0
UAS: 3428 3418
LOS: 1 0
LOF: 7 0
LOM: 0 0
Latest 15 minutes time = 11 min 33 sec
FEC: 68 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 9 0
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 16 hours 56 min 33 sec
FEC: 61869 15
CRC: 1790 7
ES: 13 6
SES: 10 0
UAS: 3428 3418
LOS: 1 0
LOF: 7 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 5 hours 36 min 55 sec
FEC: 463 2
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
>
As to yesterday's events, which are the, I think, the matters concerning Chrys, the problems arose when I tried to use the NTE5C Mk4 test socket in anticipation of the tests PN wants me to run.
I opened up the faceplate and inserted the RJ11- RJ11 cable in what thought was the test socket just below the lip of the split top/bottom halves. It was impossible to see whether it had to go in clip up or down, but seemed firmish. The router lights did show some activity, but never got to internet illuminating. Mostly it got to the WLAN light, which though lit was quite dull either way the cable was in the test socket.
I gave up then!. Doubtlessly
I am
getting something wrong.
Just wondering, if puting the RJ11 in the test socket is me being stupid. Maybe I should've used the filter I still have, then plugged RJ11 into that.
Or am I barking up wrong tree again?