Hi,
While this is minor for many, it's a small update regarding getting DSLStats to log and remain stable (no random error popups) with the ZyXel C1100Z modem (CenturyLink).
The following is what I have set for most of the data returns...
Modem/router model: Zyxel C1000Z
IP address: 192.168.0.1
Telnet user: admin
Telnet pass: <customSetViaTheGUI>
Telnet port: 23
NOTE: This modem does support a basic SSH terminal, exactly the same as telnet, but not as "buffery"/slow on data return.
Shell Command: <none>
CLI Command prefix: xdslctl
NOTE: adsl can also be used on this modem.
Custom prefix: <none>
Attached what items to monitor looks like. Enabling the other check boxes makes DSLStats become error central.
Unfortunately, I cannot get QLN, Hlog, Bitloading and SNR to reliably work on DSLStats. The following commands do return data on the terminal/telnet session via putty, but causes errors on DSLStats...
> xdslctl info --SNR
> xdslctl info --QLN
> xdslctl info --Hlog
> xdslctl info --Hlin
> xdslctl info --HlinS
NOTE: Hlin and HlinS both return 0's or 0.000000e+00.
> xdslctl info --Bits
The above commands use to mostly work when the C1100Z was on ADSL2+ with the above set. I don't recall which items i had disabled back when. All of the above on VDSL2, profile 8a, go up to 4095 lines returned.