Hi All,
I recently took the plunge and cancelled my Virgin Media connection because of poor network. I decided that i'd rather go for a slower speed service that is reliable rather than an unreliable service. I had Zen's 80/20 FTTC service installed last month on a new line. There's no internal cabling and OR installed a new socket with in-built micro filter. I'm using a Draytek Vigor 2860 router.
Initially my line synced at 63Mb but after 3-4 days this dropped down to 55Mb with light interleaving applied. My SNRM is 5dB. No sign of G.INP being swiched on. The line has been stable and has been up for 89 hours so far. The last disconnect was down to me trying out the supplied Fritzbox router as suggested by Zen, but that synced at an even lower speed.
Can anyone give me any insight as to why my router won't sync at the max attainable rate? Also does anyone have any suggestion as to whether G.INP might be applied by the DLM and in what kind of timescale?
My line stats are below.
Thanks for reading and for any suggestions
ATU-R Information
Type: VDSL2
Hardware: Annex A
Firmware: 05-07-04-03-00-07
Power Mngt Mode: DSL_G997_PMS_L0
Line State: SHOWTIME
Running Mode: 17A
Vendor ID: b5004946 544e0000
ATU-C Information
Vendor ID: b5004244 434da48c [BDCM]
Line Statistics
Downstream Upstream
Actual Rate 55006 Kbps 19999 Kbps
Attainable Rate 63450 Kbps 21996 Kbps
Path Mode Interleave Fast
Interleave Depth 801 1
Actual PSD 7. 9 dB 12. 5 dB
Near End Far End
Trellis ON ON
Bitswap ON ON
ReTx 0 0
SNR Margin 5 dB 7 dB
Attenuation 19 dB 22 dB
CRC 19 471
FECS 347600 s 2607 s
ES 2 s 418 s
SES 0 s 0 s
LOSS 0 s 0 s
UAS 31 s 966 s
HEC Errors 0 0
RS Corrections 0 0
LOS Failure 0 0
LOF Failure 0 0
LPR Failure 0 0
NCD Failure 0 0
LCD Failure 0 0
NFEC 254 85
RFEC 16 16
LYSMB 5374