hey all,
thanks for all the details / guides in this topic!
I've bought a DBA4132, read a lot and spend a few hours playing around, flashing firmware...but I've got some questions to verify my findings/assumptions...is someone willed to enlighten me?
1) v1.0.3 is the only firmware which can be rooted in active mode (using autoflashgui), correct? (rooted & active v1.0.3 is then used to root the inactive, newer firmware like v1.1.0/v1.0.5 on the other bank)
2) Downgrading from v1.1.0 to v1.0.5/v1.0.3 is hassle-free because the autoflashgui exploit works, but whats up with newer fw? Does the exploit not work anymore or does the firmware prevent downgrading no matter if you use autoflashgui or TFTP-Recovery? (are there any other ways to flash?)
3) Following the Guide in Post/Reply #992 I got active-bank1-v1.1.0-rooted-oemgui & inactive-bank2-v1.0.3-rooted-oemgui; after installing v8.5.0 AnsuelGUI (
https://github.com/Ansuel/tch-nginx-gui/tree/master/compressed) while running bank1 I got: active-bank1-v1.1.0-rooted-
ansuelgui & inactive-bank2-v1.0.3-rooted-
oemgui - is this the expected/desired outcome? (I thought the ansuel gui automatically installs itself to bank2, too!? Went something wrong? Should I manually install the ansuelGui on Bank2?)
4) Is the SerialConnection a way to manually root newer Firmware Versions (> v1.1.0)? Are the default passwords (of root/technician/superuser) known? (didn't search for them yet...just read somewhere that serial access is possible but for now had no look at the details)