Heres an eci line on 3db by the looks of it. DLM stepped it down from 6 on the ds today to 3.2.Rise in sync and max attainable.. no g.inp though which seems a little odd ?
(Not my line)
DSLAM/MSAN type: IFTN:0xb206 / v0xb206
Modem/router firmware: AnnexA version - A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 3 hours 47 min 35 sec
Resyncs: 0 (since 12 Jun 2017 18:22:48)
Downstream Upstream
Line attenuation (dB): 16.1 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 79994 20000
SNR margin (dB): 3.2 11.3
Power (dBm): 6.4 6.4
Interleave depth: 1419 1
INP: 3.00 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)
RSCorr/RS (%): 0.0336 0.0002
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 0 0
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 28111 Kbps, Downstream rate = 86620 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 79994 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 3.2 11.2
Attn(dB): 16.1 0.0
Pwr(dBm): 6.4 6.4