Thanks for the reply. What part of the information above reveals the interleaving? The application of G.INP what is it and why/when should it happen?
The INP of 3 indicates interleaving as well as the interleave depth being 755.
G.INP as far as I am aware usually takes 2 weeks to apply after a DLM reset however it currently only works on a Huawei cabinet, if your cabinet is an ECI one then the interleaving should still disappear after a few weeks but the benefit will not be as great as on a Huawei one.
Guide to identifying cabinet type
http://www.kitz.co.uk/adsl/fttc-cabinets.htmA non-G.INP non-interleaved line stats.
Stats recorded 27 Sep 2016 18:50:48
DSLAM/MSAN type: IFTN:0xb206 / v0xb206
Modem/router firmware: AnnexA version - A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 2 hours 56 min 47 sec
Resyncs: 0 (since 27 Sep 2016 15:57:45)
Downstream Upstream
Line attenuation (dB): 14.3 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 73584 20000
SNR margin (dB): 6.3 9.5
Power (dBm): 4.3 4.4
Interleave depth: 1 1
INP: 0 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)
RSCorr/RS (%): N/A 0.0017
RSUnCorr/RS (%): N/A 0.0000
ES/hour: 29.1 2.29