Sorry about that I have been so busy programming a new CMS for my site that I have not had time to think. It also could be the fact that I have had Grand Theft Auto 4 for the last 6 days so I have kind of not seen much daylight
.
Both the lines defiantly take the same route according to the BT engineer that was here last time.
None of the lines have any extensions.
Here is a diagram to let you see how i have done it:
The green dots are a CAT5e cable that i have fed from the hall to the study. I have lobed one RJ45 connector of normal modem cable and used 2 junction boxes (1 at each end of the CAT5e) so it goes: Modem Cable>>CAT5e>>Modem Cable
What i am going to do is put 1 be box in the hall and then use the CAT5e as a ethernet cable to the router in the study.
When i swapped the modems over both lines dropped by 1mbit and there SNRs stayed at 6.5DB. When i swapped them back they have stuck at the same sync speeds
. I think i am going to try 2 DG834GT's as the BeBox is very very hot running and i get packet loss sometimes.
I also tried swapping plug sockets over(and plugs) to no avail. I have also flicked ever circuit breaker bar the modems and routers and that did not change any stats either.
I am stuck now