Hello everyone,
At the moment, the connection does not have G.INP enabled on the line, is there anyway to enable G.INP on the Unlocked HG612 it's self, or can I make the cabinet enable it from my end, by ringing up BT ?
Stats recorded 30 Apr 2016 09:41:33
DSLAM/MSAN type: IFTN:0xb204 / v0xb204
Modem/router firmware: AnnexA version - A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 16 hours 32 min 11 sec
Resyncs: 0 (since 30 Apr 2016 00:41:31)
Downstream Upstream
Line attenuation (dB): 20.9 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 39153 9245
SNR margin (dB): 6.2 6.4
Power (dBm): 12.1 6.9
Interleave depth: 1 1
INP: 0 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)
RSCorr/RS (%): 0.0005 0.0061
RSUnCorr/RS (%): 0.0003 0.0000
ES/hour: 18.0 0.92