Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[art37]

No problems whatsoever with G.INP on my ECI cabinet and Fritz!Box 7490. Rolled back late yesterday evening with the loss of Fast Path and with 8ms downstream latency. Re-sync at 79995/20000 (pre G.INP settings) at 8.03 am this morning. Fast path etc restored. I lost about 5 Mbps on my max attainable rate following yesterday's rollback.

[les-70]

  @kitz   I see they got round to your connection.  Welcome to to the disappointment!!

[underzone]

Poor Kitz! I don't think I have ever seen a line that syncs at 75979 with interleaving applied 

[g3uiss]

Seems still a few last men standing on MDSLWS on ECI

My line is back to pre g.inp in terms of sync/es .

I did note when I did have g.inp, a increase in US ES, not much but enough to notice

Tony

[S.Stephenson]

If they take mine I'm going to the exchange 

[kitz]

pfttttt..  Just got in.    In over 13yrs of adsl Ive only been interleaved once, and that was because of a line fault.

PFTTTTT..   I have some sort of weird capping going on too.  Just tried a resync to see if I could pick up some more speed, but its not going for a straight 6dB target SNRm.

[les-70]

  It looks normal for interleaving but I would not worry for while yet.  Most lines seem to got back  to fastpath after anything from 1-6 days.  I would not start to worry till next Friday. 

[MikeZ]

I did note when I did have g.inp, a increase in US ES, not much but enough to notice

Yes, same here - it was rare to have more than 1 or 2 a day pre-G.INP but now I have 2 or 3 an hour.

[kitz]

@les-70.

Yep just sitting on it for a few days, nothing I can do.  It's following the normal path of DLM reset for g.inp lines.
Seems a bit odd that even a resync doesnt go for a straight target SNRm of 6dB though.

[Chrysalis]

for what its worth I never get 6.0db on a resync, its always around 6.3-6.5.  Your snrm is within that range. 

[simoncraddock]

I'm still stuck with g.inp, but with the default snr of 6dB I can no longer hold a stable connection for more than several hours. Only by setting my router to use 8dB snr on the DS can I get any stability.

You would have thought with the lessons learned last year we wouldn't see a repeat 'screw up' by BT, but once again they make themselves look completely inept.

[NewtronStar]

Simon I think you have some sort of line fault going on rather than G.INP being the culprit once G.INP is removed and you still have issues call your ISP asap

[simoncraddock]

An engineer is already booked for Wed next week, if g.inp drops off in between I'll soon know. My line problem started around the time g.inp was enabled, bit of a coincidence.

[NewtronStar]

It is a bit of coincidence you should have posted on the Kitz forum with your issues when G.INP was applied to your line

[Chrysalis]

nasty FEC spike today for kitz, lets hope FEC has no bearing on if DLM decides to move to fast path.