The new photos add more detail yet again, as I can now see that there are 3 cables leading down into the fibre enclosure.
Looking back up at the top of the pole, in some of the earlier photos, I can now see that the thicker of the three goes to the manifold. You'd expect this to be thicker, as it holds the empty BFT tubes for blowing fibres to the home.
The two thinner cables now spring to attention more, and seem to be routed off left and right, just above the manifold, but below the copper, to the previous and next poles. Looking closing at the ways the poles connect (ie paying proper attention), you can see both the thick copper distribution cable and the thin fibre cable running in parallel.
What I can't see, though, is any indication of cables going to individual premises from the top of the pole.