@KIAB: looking on MDWS is looks like the reason you don't have G.INP is because you don't need it. Before, you needed G.INP to get what you had and for it to be stable (before then you would've been interleaved which is why you'd have lost 6Mbps) - now you have a more stable line, you don't need interleaving or G.INP.
69/17.5 is a significant improvement compared to 45/8!
Well, it's taken nearly 5 years of complaining to higher powers in BT & OR, to finally get the aluminum replaced.
Made myself very, very unpopular
, but I had no intention of backing down & letting them walk over me.
Very please with speed increase from 9-14Mb to 65Mb DL, & UL now 15Mb, previously around 3-5Mb.
I was hoping DLM would up the speed a bit more, but nothing so far, but I'm very satisify with what I now have.
Stats recorded 24 Jun 2015 14:18:52
DSLAM/MSAN type: BDCM:0xa44f / v0xa44f
Modem/router firmware: AnnexA version - A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 22 hours 47 min 39 sec
Resyncs: 0 (since 24 Jun 2015 14:18:46)
Downstream Upstream
Line attenuation (dB): 17.8 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 68906 17350
SNR margin (dB): 6.3 6.1
Power (dBm): 13.8 7.4
Interleave depth: 1 1
INP: 0 0
G.INP: Not enabled
RSCorr/RS (%): N/A 0.0808
RSUnCorr/RS (%): N/A 0.0000
ES/hour: 0 0