The broadband username has 'HG31' in the name. I saw a mention elsewhere I might be able to remove the hg31 portion and just use the rest of it for PPP?
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 36500 Kbps, Downstream rate = 123116 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79987 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 18.3 23.0
Attn(dB): 5.4 0.0
Pwr(dBm): 13.5 -13.4
VDSL2 framing
Bearer 0
MSGc: 18 26
B: 239 237
M: 1 1
T: 23 42
R: 0 16
S: 0.0955 0.3781
L: 20104 5374
D: 1 1
I: 240 127
N: 240 254
Counters
Bearer 0
OHF: 54740743 1674907
OHFErr: 61 60
RS: 0 4179248
RSCorr: 0 35
RSUnCorr: 0 0
Bearer 0
HEC: 468 0
OCD: 52 0
LCD: 52 0
Total Cells: 1034829085 0
Data Cells: 268622276 0
Drop Cells: 0
Bit Errors: 0 0
ES: 52 54
SES: 0 0
UAS: 22 22
AS: 90534
Bearer 0
INP: 0.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 1.65 3.98
OR: 116.09 64.22
AgR: 80103.09 20063.54
Bitswap: 43590/43590 5874/5874
Also currently uploading to MDWS if anyone wants to take a peek.
However...
Tracing route to bbc.co.uk [212.58.244.20]
over a maximum of 30 hops:
1 2 ms 2 ms 2 ms BTHUB5 [10.21.12.254]
2 18 ms 17 ms 20 ms host81-148-128-1.in-addr.btopenworld.com [81.148
.128.1]
3 18 ms 18 ms 18 ms 213.120.182.141
4 18 ms 18 ms 18 ms 213.120.161.82
5 18 ms 18 ms 19 ms 31.55.164.187
6 19 ms 19 ms 19 ms 31.55.164.107
7 23 ms 23 ms 22 ms acc1-10GigE-0-5-0-7.bm.21cn-ipp.bt.net [109.159.
248.102]
8 34 ms 31 ms 31 ms 109.159.252.210
9 30 ms 31 ms 31 ms core1-pos9-0.bletchley.ukcore.bt.net [194.72.31.
133]
10 30 ms 29 ms 28 ms 194.74.65.42
11 * * * Request timed out.
12 * * * Request timed out.
13 25 ms 31 ms 25 ms ae0.er01.telhc.bbc.co.uk [132.185.254.109]
14 23 ms 23 ms 24 ms 132.185.255.149
15 29 ms 29 ms 31 ms fmt-vip71.telhc.bbc.co.uk [212.58.244.20]
Trace complete.
This is absolute best case, after GW hopping.
Currently using a powerline adapter which adds 2ms, as per first hop.