I attached full logs which include old data, 18 may (today) I installed 2.1 and the last successful snapshot graph with the box ticked was done at 18:18.
Also there is 3 CURRENT_GET_DATA_ERROR files now in the scripts folder as well, did you adjust the throttling from the working version you gave me some weeks back in 2.1?
Ok I think we can ignore those 3 files, the timstamps match when I was doing manual snapshot runs so was probably conflicts.
I am running windows 7 64bit ultimate SP1.
When snapshot graphing failed &
"enable extra debug info logging" was unticked, which PC Speed setting were you using?
the
xdslcmd info --linediag command made 500 attempts to get the data before quitting & generating the
CURRENT_GET_DATA_ERROR-XXXXXX-XXX.TXT files.
The
FAST PC Speed setting adds some pauses to slow down the PC to the speed of the modem & generating log files also slows down the PC each time a line of data is written.
I'm 'guessing' that your PC Speed setting was
SLOW, which means no pauses.
That's the setting I use at my end.
Even with Extra debugging info OFF, it only takes 227 attempts to get all the linediag data.
With Extra_debugging info ON, it only takes 66 attempts.
Just in case I need to make any more allowances for
FAST PCs, would you mind trying to generate the snapshot graphs with these settings in the GUI & ini file:-
PC Speed
FASTExtra debugging info
OFFExtensive error logging
OFFWhen you have tried that, please post the relevant data from
CURRENT_ERROR.LOG_file_ERROR.TXTIf it takes anywhere near 500 attempts to get the data with those settings, I'll either increase the pauses or increase the maximum number of attempts.
From memory, I think the highest number of attempts actually made on your setup (before v 2.1) was around 400 or so.