Using the latest v18 firmware could someone else attempt to configure VLANs and tell me if you can duplicate the failings I see?
Steps:
1. "Vlan Group" > "Add New VLAN Group", Name="Management", ID=99, Include=eth5, Tx Tagging=No
2. "Vlan Group" > "Add New VLAN Group", Name="Lab", ID=5, Include=eth1, Tx Tagging=No
3. "Home Networking" > "LAN Setup" see if the "Group Name" selection menu includes the new groups
4. "Home Networking" > "Additional Subnet" see if the "Group Name" selection menu includes the new groups
5. If you see the VLAN names listed, can you configure them with a subnet?
I've tried these steps and never see anything other than the "Default" group, even after a reboot.