Hi,
I have managed to make a connection via Serial-Console to the Technicolor TG789Bvn / TG799vn wich is the O-Box 3 here in Belgium.
Although it is also possible to access it via Telnet if I connect a TTL to RS232 to ETHERNET converter that than is accessable via a IP address.
The command prompt that shows up is:
TG233 login:
After put the name Administrator I see this output:
TG233 login: starting pid 1049, tty '/dev/ttyS0': '/bin/login'^C
starting pid 1050, tty '/dev/ttyS0': '/bin/login'
TG233 login:
TG233 login: Administrator
BusyBox v1.10.3 (2013-08-16 16:29:13 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
------------------------------------------------------------------------
______ Technicolor TG799vn v2
___/_____/\
/ /\\ 10.5.D.W
_____/__ / \\
_/ /\_____/___ \ Copyright (c) 1999-2013, Technicolor
// / \ /\ \
_______//_______/ \ / _\/______
/ / \ \ / / / /\
__/ / \ \ / / / / _\__
/ / / \_______\/ / / / / /\
/_/______/___________________/ /________/ /___/ \
\ \ \ ___________ \ \ \ \ \ /
\_\ \ / /\ \ \ \ \___\/
\ \/ / \ \ \ \ /
\_____/ / \ \ \________\/
/__________/ \ \ /
\ _____ \ /_____\/
\ / /\ \ /___\/
/____/ \ \ /
\ \ /___\/
\____\/
------------------------------------------------------------------------
{Administrator}=>
{Administrator}=>
What commands are used to show the dsl information.
Any help is welcome!
hello...
sorry for this reply, but i cant find anything different from this on entire internet.
as i read you managed to access serial console of TG799vn.
i also have this router; i have already opened it, and on top/left of pcb there
seems to be a [1] serial-header but i cant find TX/RX pins: i need to bridge some circuits soldering?
is there some datasheet?