When installing, yes the engineer said Upstream rate = 2495 Kbps, Downstream rate = 52999 Kbps was "maxed out" but I am capped to 40.
I tried a different cable and also tried diff firmware , prob hence the resync. What is the best firmware to use at the moment?
While my connection was down recently, I reset the firmware to Asbokid's original unlocking firmware version & waited for BT to remotely update it:-
xdslcmd --version
xdslcmd version 1.0
DSL PHY: AnnexA version - A2pv6C030b.d22g
******* Pass *********
It was remotely updated 2 days later:-
xdslcmd --version
xdslcmd version 1.0
DSL PHY: AnnexA version - A2pv6C038m.d24j
******* Pass *********
As this was BT's update, the modem's GUI is disabled, but Telnet & my programs' access still work.
Prior to this, I was using Wolfy's revision with GUI reinstated with no issues at all:-
bcm96368MVWG_fs_kernel_HG612V100R001C01B030SP06_unlockedguiI'll probably revert to Wolfy's version soon.
In your case, in IoM, I have no idea whether the firmware will be remotely updated, so I'm not sure which version to recommend.
One of the updated versions may just cause issues with your 8a profile, but I don't really know.
I see from your Plink log from 15th that you were using Asbokid's firmware with the newer BLOB:-
xdslcmd --version
xdslcmd version 1.0
DSL PHY: AnnexA version - A2pv6C035m.d22g
******* Pass *********
Which version are you now using?
Also I purchased a mk2 OR faceplate, which I tried briefly for my adsl but made no diff I could see, I may put that on and see what happens.
Existing faceplate attached,
http://postimg.org/image/dkf7jvxzn/
It wouldn't do any harm.
They are supposed to assist with VDSL2 connections & some users believe it has caused a slight improvement.
Will see if I am getting stats when I get home.
Cheers for that.
The raw data from ongoing harvesting should also be stored in
"xlogfile.txt"It would be worth seeing if that is working & maybe post a copy for me to view.