Im just popping in to update you, I currently have no AV installed at all.
too keep it short about my USB issues, running DSL Stats has cause a crash on my system thats done something to windows USB device drivers or the regsitry (as I was getting corrupt registry error in devmgr for my mobile phone), Ive managed to get my Xperia Mobile working again (by removing USB, uninstalling, removing power from system and turning on and reinstalling) but can not get my Joypad working again using same method...well, I did once but had to change USB port using method I mentioned..but shutdown the computer & start back up it was as if it was uninstalled and again driver installed failed.?? just cant get my head around it? error 43
anyway, back to DSL Stats :- before with old 2.91 version I would have loads of bitswaps, now I havent? I can show you graphs before and after (see below_, just doesnt look right? unless my router is suddenly having a short period of no bit-swappping? - also the AS Uptime is missing.
EDIT: Iam getting very small amounts of bitswap recording in Bit-Swaps Per Minute - but nothing reflected in Bit-Swaps Per Tone? (see images below) -
EDIT 1.5: I lie .. now there is upload bitswaps showing in BS per tone but no download BS's showing?
EDIT 2: It seems to have issues running alongside DMT Tool (which RS-W didnt) - ive been getting "no data in last response" and "no response from router" when DMT Tool was running only for few minutes.
when I ran it just now it said no response from the router, so i closed it, deleted all the files (again about 4th time ive done this) then extracted them again from the zip file and try again and set it up again, closed it to save the settings
and its working. 8)
it would be great if it saved settings as they were made...or had SAVE/APPLY button somewhere? because if one shuts down windows without first exiting the program it wont remember their settings or save images etc... I dont recall having any problems with RS-W in this respect? it seemed to me that the settings were saved as amended? as i never shut down RS-W I just shut down windows.
also, I think it should start all graphs up in compressed view... expanded view should only be chosen by the user for a more refined inspection, the save to folder works great but any "expanded view" images (QLN, HLOG) dont save as a viewable image, it says INVALID IMAGE, when i change to compressed view and exit the program and re-check its ok..
another suggestion is combine the SNRM Tweak and Additional Tweaks in a manner so an SNRM Tweak command can be execute along with the others.. this is because your current setup means you can have either and not both, so if im manually using 3db SNRM and want to enable i24k or PHyRe then my SNRM will go back to sky's default of 7db (with i24k and PHyRe on) - I used to set commands in DMT Tool to execute whatever I wanted with the SNRM tweak included so I'd get both.
here you can see DSL Stats Bit-Swaps Per minute:
here you see nothing reflected in Bit Swaps Per Tone:
here is what my bit-swaps per minute usually look like:
heres what my bitswap per tone would normally look like after a bit run:
Iam going for my tea now and walk the dog... when i get back I need to try and sort this USB Joypad issue out and have a closer inspection on these bitswaps
thanks again for your efforts Eric... sorry to be moaning lol...