Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jstallan]

Hi,

I have a DGN2200 and wondering how I can get the Date and Time set on the router. The router has 'Readyshare' which works fine apart from the fact that all the JPG files stored on the USB stick seem to have the same date/time as the router. In the router there is an option to select time zone and adjust daylight saving but that is all - nothing to select NTP server.

Setup is as follows :-
Billion 7700n connected to the phone line and Homeplug attached.
DGN2200 connected to Homeplug in office (no phone line attached). DHCP disabled.

everything else works fine.

Any advice greatly appreciated.

John

[kitz]

The DGN2200 has a BCM 6358 chipset.  Most of the Broadcom chipsets use similar commands so you may well be able to use the SNTP command via the CLI

SNTP
NAME
sntp - synchronize automatically router time with Internet time servers with a timezone.
SYNOPSIS
sntp -s server [ -s server2 ] -t "timezone"
sntp disable
sntp date
sntp zones
sntp --help
DESCRIPTION
sntp command synchronizes automatically the router¡¦s time with the specified internet timer servers.
OPTIONS
disable
If SNTP is enable, disable it (require reboot).
date
Show the current date and time of the routeer.
zones
Show the list of the supported zones.
EXAMPLES
􀁺 To set up sntp server with “Pacific Time, Tijuana” zone
sntp -s time.nist.gov -t ¡§Pacific Time, Tijuana¡¨
􀁺 To disable sntp (require reboot to be effective)
sntp disable
􀁺 To show the current date and time
sntp date
􀁺 To show a list of supported time zone
sntp zones
􀁺 To get a help

[jstallan]

Thanks Kitz. I need to study and understand a little more (bit thick)