Thanks gentlemen,
We still are some way from defining the sets of numbers. I also confirm the first number is incremented after the connection has been dropped.
The error "State Timeout" is always produced if a remote soft boot is executed.
I have recorded the following sets of numbers, but can't correlate them except to suggest that the different errors definitely change the numbers and the DSLAM type possibly affects them as well.
EDIT :- However the ADSL Mode (G DMT Annex A or G DMT2+ Annex A) does not seem to affect the numbers.
G DMT Annex A TI DSLAM 90/37 with Inconsistent signal, 106/41 with Inconsistent signal, 237/104 Loss of Signal Limit, then 236/104 when it eventually synchronised
G DMT Annex A TI DSLAM 108/46 with CRC mismatch, then 237/104 with loss of signal limit, 90/37 Inconsistent signal, 106/46 State Timeout (prob. re-boot), 90/37 then 111/51, then 90/37 all with Inconsistent Signal, then 237/104 with loss of signal limit again and 236/104 when it eventually synchronised
G DMT Annex A TI DSLAM 106/41 with Inconsistent signal, then 236/104 when it eventually synchronised
G DMT Annex A TI DSLAM 237 then 236/104 with loss of frame or signal limits on three different lines, one capped at 576** and the others on Max
** Earlier on Max with this line G DMT Annex A TI DSLAM 108/46 CRC Mismatch, 230/105 Loss of Signal Limit, 24/18 Error internal, 27/20 State Timeout (Prob reboot), 230/105 Loss of Signal limit, 230 then 229/103 when it synchronised
G DMT Annex A "Unknown" DSLAM 230 then 229/103 with loss of frame or signal limits
EDIT to add next line:-
G DMT Annex A TI DSLAM 108/46 with CRC Mismatch, then 99/40 before it was disconnected without sync.
On O2's service
G DMT2+ Annex A Broadcom DSLAM 223/93 Inconsistent signal then 236/104
On a Tiscali capped service
"Unknown" Mode "Unknown" DSLAM 24/18 Error Internal, then
"Unknown" Mode Globespan DSLAM 27/20 Error Configuration, then
G DMT Annex A Globespan DSLAM 236/104
Kind regards,
Walter
