Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dawnrider]

 have just swopped my PN supplied Thomson router for a Belkin G Wireless Modem Router 5D7634uk4A.  With the Thomson I used to be able to see the following data:

Loss of Framing (Local/Remote):
Loss of Signal (Local/Remote):
Loss of Power (Local/Remote):
Loss of Link (Remote):
Error Seconds (Local/Remote):
FEC Errors (Up/Down):
CRC Errors (Up/Down):
HEC Errors (Up/Down):

Does anyone out there know how I can do this with the Belkin?

I acn see the main page which gives me :

ADSL
Type                                            Interleave Path
Staus                                           SHOWTIME
                                                    Downstream   Upstream
Data rate (Kbps)                          1472Kb           448Kb
Noise Margin                                6                      16
Output power (dBm)                    123                  169
Attenuation (dB)                            64                   31

but no mention anywhere of :

Loss of Framing (Local/Remote):
Loss of Signal (Local/Remote):
Loss of Power (Local/Remote):
Loss of Link (Remote):
Error Seconds (Local/Remote):
FEC Errors (Up/Down):
CRC Errors (Up/Down):
HEC Errors (Up/Down):

I have tried:

Line Stats (inc SNR stats)
http://192.168.2.1/ADSL_status_main.stm

Line Stats (error stats)
http://192.168.2.1/statsatm.html

Line Stats
http://192.168.2.1/adsl_status.stm

ADSL
http://192.168.2.1/adsl_para_main.stm

DDNS
http://192.168.2.1/ddns.stm

Firewall
http://192.168.2.1/firewall_spi_h.stm

NAT
http://192.168.2.1/nat_main.stm

QoS - Set up
http://192.168.2.1/qos_main.stm

QoS - Traffic Mapping
http://192.168.2.1/qos_clsmap.stm

QoS - Traffic Mapping Stats
http://192.168.2.1/qos_stats.stm

WAN
http://192.168.2.1/atmint.stm/3
http://192.168.2.1/isp.stm

Wireless
http://192.168.2.1/wireless_e.stm
http://192.168.2.1/wireless_wep.stm
http://192.168.2.1/wireless_wpa.stm
http://192.168.2.1/wireless_1X.stm

but the browser just goes to: http://192.168.2.1/index.htm

[roseway]

I'm sorry to sound discouraging, but I don't think may people here use Belkin routers. I imagine that you got the list of hidden addresses from http://www.kitz.co.uk/routers/belkin_commands.htm and if they don't work I suspect that it may be the case that these pages have been removed (or changed) in later firmware versions.