Topic: DMT tool and netgear DG834GT saving settings (Read 5196 times)

dizzy4528 · « **on:** November 06, 2008, 08:14:37 PM »

Quick question , if i force a SNR reduction using DMT tool to say 9db from 12 db ,i am assuming this is 75% on the slider scale,then apply and resync .
Will the setting be lost when i turn off my PC or is the setting stored in the router till it reboots.

roseway · « **Reply #1 on:** November 06, 2008, 11:12:31 PM »

Hi and welcome

The DG834GT doesn't store these settings permanently, so the changes will be lost if you reboot the router, but if you leave the router switched on you can reboot the PC without losing the settings.

dizzy4528 · « **Reply #2 on:** November 07, 2008, 05:17:06 AM »

Cheers, quick and straight to the point.

roseway · « **Reply #3 on:** November 07, 2008, 07:20:30 AM »

orainsear · « **Reply #4 on:** November 10, 2008, 06:01:09 PM »

Doesn't the DGTeam custom firmware maintain tweaked settings (SNR margin etc) after a power cycle of the router?

HPsauce · « **Reply #5 on:** November 10, 2008, 06:07:32 PM »

It does.

mr_chris · « **Reply #6 on:** November 10, 2008, 06:13:39 PM »

Yes, good point... their website is here http://dgteam.ilbello.com/index.php?pid=5

News:

Author Topic: DMT tool and netgear DG834GT saving settings (Read 5196 times)

dizzy4528

DMT tool and netgear DG834GT saving settings

roseway

Re: DMT tool and netgear DG834GT saving settings

dizzy4528

Re: DMT tool and netgear DG834GT saving settings

roseway

Re: DMT tool and netgear DG834GT saving settings

orainsear

Re: DMT tool and netgear DG834GT saving settings

HPsauce

Re: DMT tool and netgear DG834GT saving settings

mr_chris

Re: DMT tool and netgear DG834GT saving settings