Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Netgear DG834G v4 and DMT  (Read 5392 times)

Oldjim

  • Reg Member
  • ***
  • Posts: 242
Netgear DG834G v4 and DMT
« on: September 30, 2008, 10:32:44 AM »

First post - can someone help
I have just changed from a Speedtouch 585 v6 (firmware 6.1.4.3) to a Netgear DG834G v4 (firmware 5.01.01) and I am having problems with DMT v8.07
After a short time it loses the connection to the router and I get this error. Is there a timeout built into it somewhere
Just to add for interest - using Routerstats to modify the default noise margin it seems to happen seamlessly unlike the Speedtouch where it required a resynch with the exchange

[attachment deleted by admin]
Logged
Jim
Plusnet

roseway

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 43432
  • Penguins CAN fly
    • DSLstats
Re: Netgear DG834G v4 and DMT
« Reply #1 on: September 30, 2008, 10:59:29 AM »

Hi and welcome.

In order to use DMT with a Netgear router I believe that you have to set it into debug mode first. Perhaps there's some time limit on this? I'm not in a position to check this at the moment, but I expect someone else will be along shortly.
Logged
  Eric

Oldjim

  • Reg Member
  • ***
  • Posts: 242
Re: Netgear DG834G v4 and DMT
« Reply #2 on: September 30, 2008, 11:52:03 AM »

Thanks for the welcome.
Further monitoring shows that for some reason it loses the connection then gets it back again as this screen print shows. The SNR fluctuation shows the drops. At the same time Routerstats shows a continuous connection.
I wonder if the Routerstats telnet is interfering with the DMT telnet


[attachment deleted by admin]
Logged
Jim
Plusnet

kitz

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 33879
  • Trinity: Most guys do.
    • http://www.kitz.co.uk
Re: Netgear DG834G v4 and DMT
« Reply #3 on: September 30, 2008, 12:13:27 PM »

I dont have a Netgear DG834G v4, but you may well be on to something with "I wonder if the Routerstats telnet is interfering with the DMT telnet"  as there are some routers which dont allow more than 1 telnet session at any one time.
Logged
Please do not PM me with queries for broadband help as I may not be able to respond.
-----
How to get your router line stats :: ADSL Exchange Checker
 

anything