Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[kitz]

At what point does it fail?

Does it fail immediately with the following message

Microsoft Telnet> open 192.168.1.1
Connecting To 192.168.1.1...Could not open connection to the host, on port 23: Connect failed

or simply "connection failed" without a reason.

or does it fail after you try and put the username and password in?



Are you able to access the following page ok
http://192.168.1.1/setup.cgi?todo=debug

[kitz]

ok Ive been doing some more searching and Im not sure if this relates to the 160N too..  but it may appear that Linksys have disabled the debug mode in some of their latest firmware 

Something else which I'm not sure will work or not because its not for your model  but try this page


http://192.168.1.1/setup.cgi?next_file=adsl_driver.htm

[robbo462003]

  After several prompts  Linksys technical support tell me that it is not possible to access the router for line data.I am now back to square one any further suggestions please?

[roseway]

Have you tried the suggestions in kitz' two messages above?

[robbo462003]

Hello Eric ,I have just tried the two most recent suggestions and get Error 404 file not found?

[robbo462003]

Eric I forgot to add when I tried the telnet instruction I got unable to connect to port 23,connection failed

[roseway]

It looks as though Linksys have changed the access arrangements then, and if they won't tell you how to get the information then you're scuppered unless some genius works it out and posts the details on the net.

[kitz]

 

[kitz]

Update on this

I have been informed that the above suggestion does work.

ie the the router should first be put into debug mode
http://192.168.1.1/setup.cgi?todo=debug

and then accessed using
http://192.168.1.1/setup.cgi?next_file=adsl_driver.htm

Frogstats page duly updated.