Computers & Hardware > Android & other hand held devices

2 ssids roaming

(1/2) > >>

bazer:
hi i dont know if im in the right forum but can someone help me have a problem with wifi calling drops intermittently  i have both 2,4 g and 5.00 as one ssid  i can see the phone cange band via wifi settings etc what i want to know does change band seamlessly i was thinking of separating ssids and check from there but wifi can still roam even when you have 2 different names for the ssids if your browsing its doesn't mater but wifi calling is very picy has anvbody else had problems with wifi calling thanks baz

Alex Atkin UK:
Seamless roaming is usually only supported on Mesh capable routers or enterprise managed Access Points.  I've never experienced it myself so I can't vouch for how seamless it really is.

XGS_Is_On:
Seamless roaming involves a tunnel between one access point and the other with your traffic going into the new access point and being tunnelled to the old. To roam across SSIDs is down to whatever you're using as a client machine, you need to be able to associate with the new network in the background before the signal from the old one gets too weak, and your machine needs to know that it can use the same IP address, etc.

I'm not sure how to proceed with this. I've only done roaming across more advanced kit that I am guessing you have on your home network.

Alex Atkin UK:
My understanding is on such a network the Access Point (in a corporate network theres likely a controller to handle all this but home mesh it would be the main router) forces you off the weaker signal BEFORE it becomes completely unusable, whereas relying on the client they tend to hang on even when traffic keeps being lost.

I'd assume it still works between radios on the same router, if its mesh capable.

XGS_Is_On:
Clients have roaming thresholds. APs can't boot them without interaction: they need to associate with the new AP before they've left the old one so always some dependence.

Navigation

[0] Message Index

[#] Next page