Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Edinburgh2]

Line stats are unchanged.

Uptime: 8 days, 23:43:24
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 5,760
Data Transferred (Sent/Received) [MB/GB]: 260.50 / 2.61
Output Power (Up/Down) [dBm]: 11.5 / 7.5
Line Attenuation (Up/Down) [dB]: 6.0 / 14.0
SN Margin (Up/Down) [dB]: 26.0 / 12.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 8 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 8 / 0
FEC Errors (Up/Down): 0 / 598
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0
Line Profile: Interleaved

My IP profile is only 5000 kbps.  But I am guessing that, with time, now that I can leave the router alone and stop rebooting it every time I call BT, the sync speed will increase until the SNR gets down to 6dB and I will get back close to an 8Mbps sync and IP profile.

Throughput is now consistent and hangs just below my IP profile (~4.6 Mbps).

[kitz]

>> My IP profile is only 5000 kbps.

It will be - cause as you rightly say thats about right for your sync speed.  Its not until youre able to get a higher sync speed that your IP profile will increase.

I would have thought that a 14dB attenuation line should still be able to sync much higher than you are doing despite having a high Target SNR.
Theres something still niggling me about your line.  14dB should be easily capable of 8Mb or more.

Are you able to contact your ISP and request that they lower the Target SNR.