Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TylerDurden]

The wireless config is the default wireless config.  I don't know how to change it, or how to share it.

[meritez]

The wireless config is the default wireless config.  I don't know how to change it, or how to share it.

Are you connecting via the web interface or winbox?

[TylerDurden]

Web interface.

[meritez]

Web interface.

can you connect via ssh?

[TylerDurden]

I haven't tried (I'm not using the Audience at the moment), but I would think so.

[meritez]

I haven't tried (I'm not using the Audience at the moment), but I would think so.

okay,

if you could telnet to it, type /interface wireless print

Code: [Select]

/interface/wireless> print
Flags: X - disabled; R - running
 0  R name="wlan1" mtu=1500 l2mtu=1600 mac-address= arp=enabled interface-type=IPQ4019 mode=ap-bridge ssid="MikroTik" frequency=2472
      band=2ghz-onlyn channel-width=20mhz secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled
      wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
      default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no

 1  R name="wlan2" mtu=1500 l2mtu=1600 mac-address= arp=enabled interface-type=IPQ4019 mode=ap-bridge ssid="MikroTik" frequency=auto
      band=5ghz-n/ac channel-width=20/40/80mhz-Ceee secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled
      wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
      default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no

 2  R name="wlan3" mtu=1500 l2mtu=1600 mac-address= arp=enabled interface-type=QCA9984 mode=ap-bridge ssid="MikroTik" frequency=auto
      band=5ghz-n/ac channel-width=20/40/80mhz-XXXX secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled
      wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
      default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no

I'd be interested in the above please