I purchased one of KJW's Draytek 2762s about six months ago, which I have been using connected to a Netgear Orbi router.
He's left it configured as he had it apart from clearing out some personal configuration stuff, so I just plugged it in in place of one of my Zyxel VMG1312-B10As and away it went.
I am highly delighted with it. Sure I have lost my DSLStats data, but actually I have a modem that syncs slightly better with something like a third of the errors on my EDI line.
I've not had a lot of time to play with it since, but decided to do a factory reset and check out the manual.
KJW had it configured with the WAN Connection set to PPoA/PPoE and that worked. (see screenshot 1)
Looking at the manual, led me to think that it really ought to be set up in Bridge mode, so have now made the MPoA / Static or Dynamic page active. It seems to work just as well with either Bridge mode or Full Bridge mode active. I think the only difference between the two is that Full Bridge mode should be used when the ISP requires VLAN tags, but don't fully understand what that means in the real world. My current settings are shown in screenshot 2.
Is anybody able to offer any guidance on the optimal setting for Draytek routers used in modem only mode?
Many thanks for your help.